Results 1 to 3 of 3

Thread: Well thats just bonzer Arrrgghhh

  1. 6th September 2013, 04:42 PM #1
    Hall's Avatar
    Hall
    Hall is offline Wizard Subscriber
    Join Date
    Oct 2009
    Location
    Cranbourne North
    Posts
    1,929
    Total Downloaded
    0

    Angry Well thats just bonzer Arrrgghhh

    Started the work needed on the Landy this arvo. Got the drag link/ pitman arm ball joint apart ok. Got the pitman arm of the power steering box ok. Wiping the crud from around the circlip that retains the lower sector shaft seal and one end of the circlip comes away. So now have a circlip with only one hole. So now Iwill have to remove the box pull it apart and replace the circlip as well as the seals.
    Cheers Hall
    Reply With Quote Reply With Quote
  2. 6th September 2013, 05:32 PM #2
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,499
    Total Downloaded
    0
    I bet it can be gotten out with a good scribe, some small screwdrivers and a bit of patients.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  3. 6th September 2013, 06:10 PM #3
    Hall's Avatar
    Hall
    Hall is offline Wizard Subscriber
    Join Date
    Oct 2009
    Location
    Cranbourne North
    Posts
    1,929
    Total Downloaded
    0
    It possibly could be got out as you noted. There is though a seal lip that is between the circlip and the sector shaft. This does not give any room for the circlip to move inwards and out of its groove. May have got it if the circlip had stayed in one piece.
    Cheers Hall
    Reply With Quote Reply With Quote
« ARACH 8 legger experts what are these? | LR Td5 crankshaft damper pulley »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!