Been through many, bought a Calphalon 1392 - been going strong for 5 or so years now.
Risking running off topic I know, but Olive oil is useless really for cooking as its burning temperature is way too low for most frying operations. You should be looking at an oil with a much higher temperature range for frying, such as rice bran or something similar. Olive oil is ideal for salads etc.
Regards
Glen
1962 P5 3 Ltr Coupe (Gwennie)
1963 2a gunbuggy 112-722 (Onslow) ex 6 RAR
1964 2a 88" SWB 113 251 (Daisy) ex JTC
REMLR 226
Been through many, bought a Calphalon 1392 - been going strong for 5 or so years now.
I personally dont like non stick pans, i much prefer cast iron or well seasoned black iron.
S/Steel are worse as they just burn everything because it just sticks to the metal.
Black iron pans are sold at catering supply shops and just need to be seasoned by heating with about 250-500gms of salt in them until the metal changes colour. From after the first use they only need a good wipe out or at worst a scotch brite.
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
I have a circulon pan that cost a bomb. Worked great for about 5 years then started to stick.. So I stopped using it. One day I needed it, so I got it out again and seasoned it as a part of cleaning it. Now it works BRILLIANTLY, and has done so for over 6 years since seasoning it.
Hercules: 1986 110 Isuzu 3.9 (4BD1-T)
Brutus: 1969 109 ExMil 2a FFT (loved and lost)
Coconut oil. Some folk don't like the flavour/smell, but little goes a long way, and is undamaged by frying/deep-frying heat. Forget about the 'saturated fat argument, the body is designed to eat it, besides a glass of booze does your waistline a lot more damage.
Butter works for me too.
Canola?- well, it's GM modified Rape-seed oil, a plant that is great for cattle-feed but poisonous to humans.
The less 'reactive' the metal the safer it is, which puts cast iron at the top of the preference list.
From a philosphical angle, cast iron would be the best and only one... (IF SWMBO could be persuaded....) seeing as it's been around forever, therefore no vested interests artificially supporting it, as the Aluminium/Aluminum, Stainless Steel, Teflon, ceramics, enamels, Unobtanium etc manufacturers are busy trumpeting the goodness of theirs...and the evils of every other material.
I'm not confident that a Big Business pursuing the $ is going to be totally honest with all the facts...
I trust the Tried and Proven...
I got the Tefal Gourmet Anodised ones & never had a prob so far. Hopefully wont either
So it appears I am not the only one with the same results, there were instructions not to over heat the pan, and when the red dot disappeared then it was at correct temperature, but the red dot seemed to one day disappear.
We also have heavy copper sandwiched base Stainless pans and pots.
It was Mentioned earlier by a member that olive oil has a low temp point, we use olive oil and find it does burn very easily.Thanks for the input everyone, Cheers,
Mario
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks