A good message in there for all, many workshops are in the very bad habit of using standard fuel hose as replacement for these small bore hoses and it just cant handle the heat for an extended period, and as stated it will become as brittle almost as glassThere may be high temp fuel hose available but why not use purpose produced coolant hose?? Its available from the major aftermarket hose suppliers.....
You have been warned!!
Zypper
There have been several members that have cooked TD5s due to the failure of the small hose beneath the turbo.It cannot be replaced with generic hose as it has different diameter ends.The heat from the turbo breaks the rubber down.When I replaced all my cooling system hoses it was in much worse condition than the rest of the hoses.Worth replacing on any high km TD5.
Andrew
DISCOVERY IS TO BE DISOWNED
Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
Snow White MY14 TDV6 D4
Alotta Fagina MY14 CAT 12M Motor Grader
2003 Stacer 525 Sea Master Sport
I made the 1 millionth AULRO post
If you replace the radiator with an updated radiator, then you can actually remove that hose and cap the coolant pipe coming out of the oil cooler. On new radiators, the outlet where this hose connects is closed. One less thing to worry about.
DISCOVERY IS TO BE DISOWNED
Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
Snow White MY14 TDV6 D4
Alotta Fagina MY14 CAT 12M Motor Grader
2003 Stacer 525 Sea Master Sport
I made the 1 millionth AULRO post
Was it a disco or defender?
Cheers Ean
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks