Results 1 to 5 of 5

Thread: 93 TD enquiry

  1. #1
    Join Date
    Jan 1970
    Location
    Queensland
    Posts
    7,904
    Total Downloaded
    0

    93 TD enquiry

    Hi folks, just been over on the ExplorOz forum and someone has just post a enquiry about a second hand 93 TD for $7500 and wanted to know if it was good value.
    Someone else has replied asking if it was auto or manual and to check under the front guards for rust.
    Please correct me if I'm wrong but they did not supply TDs with auto boxes until about 96-7 and as the guards are aluminium?
    This posting is not important to me and as I am not that up to date on the subject, someone here might be able to help a potential LR newbie with better info.
    regards

  2. #2
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,689
    Total Downloaded
    32.38 MB
    i have a august 94 build tdi auto disco so there are some around.

    there is some steel in the front of them and the allloy can oxidize in the wrong environment.
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius

  3. #3
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    Disco Tdi auto's were first available in the MA series ('95MY but made/sold in '94) with the 300Tdi engine. There was a car used by LRA for evaluation with a 200Tdi engine with an auto but I don't know where this car ended up. I last saw it around '93 or early '94.
    Tdi manuals were first available in the JA series ('92MY).

    The guards are aluminium, but the inner guards are steel I think.
    Scott

  4. #4
    bigbugga's Avatar
    bigbugga is offline Builder of Legends! Gold Subscriber
    Join Date
    Jan 1970
    Location
    Pilbara WA
    Posts
    3,434
    Total Downloaded
    0
    Not sure on the box but oxidization can happen where the steel touches the aliminium.
    Also look closly at the rear moon windows, in the roof section.
    Very prone to rust around the seals.
    There are two types of people in this world, good and bad. The good sleep better, but the bad seem to enjoy the waking hours

  5. #5
    Join Date
    Jan 1970
    Location
    Queensland
    Posts
    7,904
    Total Downloaded
    0
    Hi folks, not my area of expertise and thats why I put it to those I knew would be in a position to give some good advice. I’ll go back to the other site and relay the info. Always good to be able to help an LR user ( even a potential new one ).
    Regards. :wink:

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!