Reply With QuoteLooks like a dual wheel set on a medium sized truck, might be hard to hear from the cab.Originally Posted by Toxic_Avenger
TopicToaster
SubscriberLegend has it, this motorist presented to the mechanic stating 'It sounds like my wheel is falling off'
-Mitch
'El Burro' 2012 Defender 90.
AT REST
Looks like a dual wheel set on a medium sized truck, might be hard to hear from the cab.
TopicToaster
SubscriberIt'd make one hell of a racket in any case!
-Mitch
'El Burro' 2012 Defender 90.
Super Moderator
It looks Japanese to me. The inner wheel is held by a flange on the stud that is tightened using the square, on the outer end. The outer wheel is then secured in the normal fashion using nuts.
If you don't like trucks, stop buying stuff.
RoverLord
What bemuses me, is why has it not fallen off yet!
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
Master
I'd say that wheelstud at about 7 o'clock and some solid prayer.
AT REST
As V8Ian indicates, the inner wheel is held on by the studs and would have kept the axle stable. If the truck was lightly loaded the outer wheel would flop about until the tyre had very little load on it. In that state it wouldn't put too much stress on the remainder of the nuts.
Was hoping just the video would appear and not have to go through all the clicks.
Having been over the falls so many timesI found it fascinating to see what it looks like from underwater.
Kenley
Super Moderator
If you don't like trucks, stop buying stuff.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks