Results 1 to 7 of 7

Thread: Shoks

  1. 15th February 2007, 05:22 PM #1
    Stepho_62's Avatar
    Stepho_62
    Stepho_62 is offline Master
    Join Date
    May 2006
    Location
    Townsville, QLD
    Posts
    706
    Total Downloaded
    0

    Shoks

    G'day All

    After having had shoking run with a well recognised supplier of american shoks ( No pun intended) I have decided to purchase a set of Bilsteins

    http://cgi.ebay.com.au/ws/eBayISAPI....ADME:B:SS:AU:1

    Thought I'd found a set until I worked out that they are recommended for a 130 only

    Bit overpriced too IMHO.
    Reply With Quote Reply With Quote
  2. 15th February 2007, 07:02 PM #2
    incisor's Avatar
    incisor
    incisor is offline SysAdmin (Owner) Vendor
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,691
    Total Downloaded
    32.38 MB
    was is the going price for billies per corner?
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
    Reply With Quote Reply With Quote
  3. 15th February 2007, 08:02 PM #3
    Vern's Avatar
    Vern
    Vern is offline OldBushie
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    $175 each i think

    Stevo, you didn't have Rancho's did you
    Reply With Quote Reply With Quote
  4. 15th February 2007, 08:49 PM #4
    justinc's Avatar
    justinc
    justinc is offline Swaggie Vendor
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Actually that is a good price, as those were about $220 each not that long ago... They are valved for the weight carrying of the 130 Adrian, I would suggest they will be quite adequate when you load up for your trip, as you will be needing some rear end control (!)with all the stuff you're going to take and the camper on the back. If you buy them, and don't want them, I can always find a home for them....

    JC
    Reply With Quote Reply With Quote
  5. 15th February 2007, 09:33 PM #5
    Stepho_62's Avatar
    Stepho_62
    Stepho_62 is offline Master
    Join Date
    May 2006
    Location
    Townsville, QLD
    Posts
    706
    Total Downloaded
    0

    Shoks

    Quote Originally Posted by 6.5rangie View Post
    $175 each i think

    Stevo, you didn't have Rancho's did you
    Supplied by some dodgy buggers from Castle Hill .

    JC, I can get Billies landed here for 375 a pair front or 360 a pair rear. Will be doing this once I return from Darwin in mid March. I didn't know that they would fit a 110.

    I also need you to do the axle upgrade too. I'll give u a call.
    Reply With Quote Reply With Quote
  6. 16th February 2007, 06:35 PM #6
    justinc's Avatar
    justinc
    justinc is offline Swaggie Vendor
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    That IS some good prices Adrian, I'll have to do some more research before I have to order some and end up paying more than retail!!!!

    Axles;just give me a bell when you're ready.

    Atherton STILL looks nice, and I can keep doing what I'm doing here.....

    JC
    Reply With Quote Reply With Quote
  7. 16th February 2007, 08:06 PM #7
    Frenchie's Avatar
    Frenchie
    Frenchie is offline Wizard
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    1,575
    Total Downloaded
    0
    I put Billies on mine and they are valved WAY too hard for a 110.

    I now feel every single little grain on sand on the road.
    Reply With Quote Reply With Quote
« A question for you Queenslanders | MONDAY it should be here »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!