Thread: Rangie Flares

Thanks for that mate.
Are yours the LRA $450 kit???
Andrew

yup - got mine from Graham Coopers - LRA local supplier

HTH

LRH

Originally Posted by LandyAndy

Here you go like these.AND THOSE BONNET VENTS TOO!!!!!,thats what the one in Esperance had,look like they come off a boat,seen them on a few rangies.

Andrew

The flares on this Rangie (DRanged) are just rubber flare edging, with the cut what ever size you need.

You can get some from the UK that are Flexible like this http://www.innovation4x4.co.uk/arches.htm or the fibreglass ones from LRA.

Hope this helps.

I dont know why you would say fibreglass is hard to fix, as long as you have a bit of room underneith for a couple of extra layers for strength your fine.

Bit of bog and flow coat and your done.

Paint and re fit.

The problem with the fibreglass ones, is that you generally wreck the gaurd before breaking the flare

Originally Posted by LRHybrid100

have a look here

http://www.aulro.com/afvb/showthread...ghlight=Flares

LRH have you any picks wit the rear door open showing how its finished off?

Originally Posted by LandyAndy

Ive sat in the passenger side whilst Richard MONSTERED the left hand side panels,POO happens!!!!!Then he agrees to sell it to me!!!!
Hopefully a workout with the mig will make better protection!!!!
WEAR THEM DENTS WITH PRIDE!!!!!
Andrew

Yep, could do with some sill protectors, don't forget Andrew if you put bigger tyres on then you will need to think about what extra strain you will put on the rest of the drive train...................mmmmmmmmmmm............35" tyres, 4" lift, RC gearing in the TC...........

Originally Posted by LandyAndy

Here you go like these.AND THOSE BONNET VENTS TOO!!!!!,thats what the one in Esperance had,look like they come off a boat,seen them on a few rangies.

Andrew

Offtopic, what suspension and tyres is the D2 running? Looks sweet.