Yea his power up is impressive but a few people have had problems with his mods. I like mine![]()
Just read latest issue 4wd monthly and had a feature on a disco td5 power up by Davis performance impressive numbers 180kw and 520nm of torque did not say how much it all cost though. Puts my modified 4l v8 rangie to shame
155kw and 390nm.
Mark
Yea his power up is impressive but a few people have had problems with his mods. I like mine![]()
All prices approximation only....
Exhaust $2000
Chip $900
FIlter Mod $150
Intercooler $1400
These are approximate prices from Bruce.
Theres more to it than that though.... Power is niceDriveability is better.
There is a list member here who can feed more info
yes i was wondering about reliabilty thats a big jump in power and torque from standard.
Mark![]()
if anyone wants to get their Td5 chipped.......ive had mine done......
and its fantastic........pm me and i will tell where to get it done and cheaper.....
I have a Davis chip in mine, i also had the air filter box done too and the big chip in too, but had them put the standard air filter box back and drop to the medium chip.
The problem with the airbox mod is you loose down low torque and for me that's a big issue because i need the down low torque for towing, aspecially when taking off as i have a manual, it shouldn't be an issue with an auto.
Also the big chip makes it smoke ALOT, if you get the intercooler it is supposed to stop the excessive smoke.
Baz.
Cheers Baz.
2011 Discovery 4 SE 2.7L
1990 Perentie FFR EX Aust Army
1967 Series IIa 109 (Farm Truck)
2007 BMW R1200GS
1979 BMW R80/7
1983 BMW R100TIC Ex ACT Police
1994 Yamaha XT225 Serow
the bloke that dose his exhausts, in QLD wanted $1800 just for my 90!!!Exhaust $2000
so add another $1000 for the disco
i too have the upgrade, not a BD one! he must be p$ssing in someones pocket to get his stuff in alot of the 4x4monthly mags??
cheers phil
So what's the logic behind the less restrictive airbox reducing low-down torque? I assume that this has been tested seperately to the different chip. I thought better airflow might be beneficial for reducing spool-up time too and have the modification on my to-do list for this reason. But I wouldn't like to regress from my current setup, also a manual and doing lots of lower-rev chugging about using low-range throttle mapping in high range. I'm intrigued!
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Don't know which chip I have but Bruce owned the rig and he did the mods. With the auto conversion low down power isn't a problem the 3200 stallie is!
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks