Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 24

Thread: Rear window stone protection for towing

  1. #11
    Join Date
    Jan 1970
    Location
    Adelaide - Torrens Park
    Posts
    7,291
    Total Downloaded
    0
    Quote Originally Posted by Ken View Post
    How about a set of mudflaps mounted to the front of the trailer mudguards maybe this would solve broken rear windows
    The problem is stones are flicked up by the rear wheels of the tow vehicle. They then bounce off the front of the trailer and up into the back of the tow vehicle. Mudflaps on the trailer won't change anything.

  2. #12
    Join Date
    Jan 1970
    Location
    Ellendale Tasmania.
    Posts
    12,986
    Total Downloaded
    0
    Quote Originally Posted by sniegy View Post
    Hi PCH,
    Yes i also have a clear perspex sheet cut to the shape of the D2 glass & it velcros to the rear of the window.
    This way u can still see out the back when you have offloaded the Van & playing Offroad.
    Its cheap & works very well, the velcro acts as a cushion & spacer at the same time.
    Cheers
    How do you keep the velcro on the glass and perspect, where do you get this miracle velcro from

    I can't seem too get the velcro to stick

    Baz.
    Cheers Baz.

    2011 Discovery 4 SE 2.7L
    1990 Perentie FFR EX Aust Army
    1967 Series IIa 109 (Farm Truck)
    2007 BMW R1200GS
    1979 BMW R80/7
    1983 BMW R100TIC Ex ACT Police
    1994 Yamaha XT225 Serow

  3. #13
    RonMcGr Guest
    Quote Originally Posted by BigJon View Post
    The problem is stones are flicked up by the rear wheels of the tow vehicle. They then bounce off the front of the trailer and up into the back of the tow vehicle. Mudflaps on the trailer won't change anything.
    Kimberly Kampers fit this device to prevent that.

  4. #14
    Join Date
    Jan 1970
    Location
    Ellendale Tasmania.
    Posts
    12,986
    Total Downloaded
    0
    Quote Originally Posted by RonMcGr View Post
    Kimberly Kampers fit this device to prevent that.
    I have a stone guard and flaps as well on the camper and i thought that would be enough too, but alas no, i broke the rear window in the Disco about 500metres from the tar on the Oodnadatta track just before Lyndhurst, just a tad over 3000ks of dirt

    My theroy was it bounced off the stone guard frame, so now i use a window protector, just in case

    Baz.
    Cheers Baz.

    2011 Discovery 4 SE 2.7L
    1990 Perentie FFR EX Aust Army
    1967 Series IIa 109 (Farm Truck)
    2007 BMW R1200GS
    1979 BMW R80/7
    1983 BMW R100TIC Ex ACT Police
    1994 Yamaha XT225 Serow

  5. #15
    Join Date
    Sep 2007
    Location
    Ocean Reef WA
    Posts
    3,098
    Total Downloaded
    0

    Rear window protector.

    Hi Redback.
    I bought the velcro at Bunnings (the store I hate at weekends) and made sure the glass was real clean and it sticks very well.
    Never had a prob. with it peeling off.
    The dust does get between the perspex and window but that's what the outside mirrors are for.
    My Pioneer has the same sort of equipment as the KK and should deflect the majority of stones downwards.
    Alan H.

  6. #16
    JES Guest
    I use corflute, the plastic sign material used by real estate agents. This is a little more durable than cardboard particularly if it rains. Just tape it on and remove it whan you get home.

    I tow a KK, have done all round Oz without any problem with my rear windscreen, nor any evidence of stones hitting the corflute. They do have a good design, but there's always going to be that one time if you don't cover your window.

  7. #17
    Join Date
    Jan 1970
    Location
    Dalby
    Posts
    4,011
    Total Downloaded
    0
    Quote Originally Posted by RonMcGr View Post
    Kimberly Kampers fit this device to prevent that.
    These are common on campers.
    I don't have any rear window protection at all but no broken windows yet. Trailer hasn't seen much dirt either mind you.

    DiscoDan just got a camper and it has a similar mesh deflector like in the pic above but the mesh is oversized and can be attached (zip ties?) to the back of his Disco. It fills the void between the camper and the Disco so nothing can get flicked up.

    I would imagine that if all you did was protect the rear glass then you are still leaving yourself open to panel damage and maybe tail light damage.
    I think that the mesh trailer deflector and clear rear glass protector would be the go. I'll probably get around to that the day after I replace my rear glass

  8. #18
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    2,622
    Total Downloaded
    0
    Quote Originally Posted by Redback View Post
    How do you keep the velcro on the glass and perspect, where do you get this miracle velcro from

    I can't seem too get the velcro to stick

    Baz.
    Hi Baz,
    I just use the stuff from bunnings, but there are 2 different types & funnily enough the dearer stuff works better.
    Clean both surfaces with glass cleaner/metho & let them set for a day.
    There is another type of velcro used in the car industry that is about $100 a roll of 20M. I usd to use this when i worked in the VicPolice..excellent stuff but just dear.

  9. #19
    Join Date
    Jan 1970
    Location
    Barwite. Victoria
    Posts
    1,695
    Total Downloaded
    0
    Hi Chris,,,,We use a piece of polycarb perspex 3mm and velcro to hold it on,,,,the slots top and bottom are the aerodynamics to clear the dust etc that builds up in between whilst driving

  10. #20
    Join Date
    Jan 1970
    Location
    Ferny Grove, Brisbane
    Posts
    757
    Total Downloaded
    0
    Chris,

    I put on an Obies Rear window Saver.
    http://www.obiesoutback.com.au

    I do believe you can make one yourself for a lot less but I was in a hurry. I wanted something I can leave on all the time because a) it needed to be neat as my wife is the daily driver and b) I also thought the velcro would last longer if it is covered. Downside is if you use the rear window wiper it scratches the perspex.

    As mentioned the slots are meant to help clear dust but they also provide a bit of flex which allegedly assists with something.

    They also have small soft spacers which you can see in the photo to prevent impact transferring through the perspex directly onto the glass. Apparently only a problem with the very large stones.

    The velcro is industrial strength imported although Obies have been having trouble getting the quality that they are used to because his supplier stopping importing. Some of my velcro has seperated between the adhesive and the strip but there is still no chance of it coming off even if I want it to. As you can see there are ony two major strips at each end and then lots of small strips which I think is key. That way if one small strip fails it does not take the rest with it.

    The procedure for attaching would be the same for a DYI job and involves cleaning the glass with mild alcohol and heating the strips & glass with a hairdryer. Helps with bonding. You only get one go as it is pretty permanent once on there, which surprised me.

    From my discussions with him, Mike from Obies is clearly an honest man and was apologetic because he did not have enough experience with the new tape he was using so he sent me plenty of spare just in case. That was in August.
    Attached Images Attached Images
    Last edited by DiscoStew; 20th November 2007 at 10:20 PM.

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!