pipe benders 3"

**sclarke** · 26th January 2008, 08:34 AM

Originally Posted by stevo

thanks for the replies it is for the front bar I am making for my disco do not want to have that crushed look on the bends.
will ring around the metal shops on monday and see who can do the job for me.
Made a roll cage years ago for my old series (1959) soft top landy out of 3" pipe looked good and bolted it to the chassis

3" is HUGE.............
Why not go the common 60mm and then you can get a bender easy...

**awabbit6** · 26th January 2008, 08:57 AM

I have used these guys to bend pipe for roll cages. They are very good and will work to a template that you provide.

R G C Metal Rolling & Bending
9 Quindus St, Beenleigh 4207
(07) 3804 7385

Provided the pipe you are using is heavy walled, there shouldn't be too much deformation. The main hoop in my Datto 1200 is 45mm OD with a 2.8mm wall and the bends they did are perfect.

**Vern** · 27th January 2008, 12:25 PM

Yeah you need a good set of dies not to get that dented look. I have a Swade Sir 16b pipe bender and unless you use thick walled pipe it kinks and these aren't a cheap bender. ONeday i'll buy the tube bender adapter for it.

**Chucaro** · 27th January 2008, 01:55 PM

Mate, prefabricate it, do not try to bend them with el chepo pipe bender.
Cheers

Thread: pipe benders 3"

Thread Tools

Bookmarks

Bookmarks

Posting Permissions