Before the clever folks jump in, I'll guess 14mm 12point. Pretty sure that's what's on the Defender.
EDIT; Ah, look here
http://www.aulro.com/afvb/technical-...tml#post717449
Cheers
Simon
Can anyone tell me what socket is required to undo the front disc caliper on the series II Disco??? Need to change a few bits & fix the bloody traction control.
Before the clever folks jump in, I'll guess 14mm 12point. Pretty sure that's what's on the Defender.
EDIT; Ah, look here
http://www.aulro.com/afvb/technical-...tml#post717449
Cheers
Simon
Not quite.....
Could be 17mm 12 point. Normal Sidchome socket on a breaker bar. Just remember the top bolt is very close to the sensor wire. Treat very carefully
I have just changed the rotors on my D2 today and that little screw that hold the rotor is just a little bit difficult.
Decorum prevents me what I really think of it
its 19mm.
Here's the link...
http://www.aulro.com/afvb/technical-...ii-brakes.html
Last edited by feral; 5th April 2008 at 11:48 PM. Reason: Got it wrong.......again!
The good thing about that little screw is the lack of replacement need---
oh and be carefull of the small rubber o ring in the sensor---
"How long since you've visited The Good Oil?"
'93 V8 Rossi
'97 to '07. sold.![]()
'01 V8 D2
'06 to 10. written off.
'03 4.6 V8 HSE D2a with Tornado ECM
'10 to '21
'16.5 RRS SDV8
'21 to Infinity and Beyond!
1988 Isuzu Bus. V10 15L NA Diesel
Home is where you park it..
[IMG][/IMG]
cool, thanks lads. I need some new discs & the front left sensor is giving me ****e........ again.![]()
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks