Don’t think they make one with a 1000cc motor do they, coz I sure as **** won’t get anything with pedals... 😉Quote:
Originally Posted by DiscoMick
Printable View
Don’t think they make one with a 1000cc motor do they, coz I sure as **** won’t get anything with pedals... 😉Quote:
Originally Posted by DiscoMick
One of these might be better.
ZERO MOTORCYCLES – The Electric Motorcycle Company - Official Site
Belated woohoo!
Finally finished mine the other day.
a few tweaks of the rollerdoor today, cleaned out lots of carp out of the 'sunroom'.
All that remains now is to flash the windows and build the side doors.
Windows weren't part of the build specs, I've had them for years to go onto whatever shed I eventually got around to build.
Lots of stuffing about needing to work around bad design from the shed design mob.
Attachment 152456
Well done! Looks good.
Hi All,
I have managed a little bit of work in the shed the last few weeks.
Basically - sorted out some parts shelves (Stage One V8, Perentie, Freelander, RRC):
https://i.imgur.com/uxxFqgn.jpg
Installed some man cave pictures to break up the tin walls:
https://i.imgur.com/reQo1uE.jpg
https://i.imgur.com/7hTerXS.jpg
https://i.imgur.com/0On8GCr.jpg
https://i.imgur.com/52J8HPt.jpg
I have started making up fake number plates for each of the vehicles & trailers...
https://i.imgur.com/MEjuKp8.jpg
Another project to spend time on.. Lol
Cheers,
GG.
bluddy roller doors!
I've installed mine, and it move perfectly freely.
About 1kg of force needed to pull it down from the top posi, glides bootifully, then abotu half way pills itself down and changes to a bit of force neede to get it the last 1/3 down.
Slides very nicely, as you'd expect from a new door.
But the motor drive just didn't want to start it coming down from the top posi. Curtain always started ballooning and inch or so before it started to move the curtain down.
This lead to the ballooning roll catching on the bent guide section of the guide rail! ARGGHHH!
Blasted thing .. driving me insane.
So added the supplied weight, and all good now.
Stupid part is that with the weight (taped) to the door, the force needed to pull the curtain down from top posi is still about 1kg(varies between 1-1.5kg).
I'm not so much worried about the accuracy of the dinky scale thing I'm using .. it's the same scale used each time. Just wondering why with or without weight it's the same force.
Anyhow, don't want to drill through the door(yet) to permanently install the weight, so taping it is where it's at for now.
So I’m looking at upgrading my 6x9 metre shed which also doubles as a garage for our two daily cars. So it got me thinking about peoples garages / sheds. What’s out there?
There’s already a thread. Do a search down the bottom of the page and marvel [emoji6]
merged with old thread
Do you know much about sheds? [bigwhistle]Quote:
Originally Posted by pop058
