Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 30

Thread: Look at our laundry floor

  1. #11
    mike 90 RR Guest
    Oh ... forgot ... If you can't get Lino .... Then just use Moisture resistant ply and then give it a coat of varnish / both sides .... It will look great ... Trust me // I'm the building designer // my living

  2. #12
    Join Date
    Dec 2007
    Location
    Central Queensland
    Posts
    3,468
    Total Downloaded
    0
    wtf is with people deveoping a fetish in this country for front load washers?????

  3. #13
    Join Date
    Dec 2006
    Location
    NSW , Pennant Hills
    Posts
    3,477
    Total Downloaded
    0
    Quote Originally Posted by Sprint View Post
    wtf is with people deveoping a fetish in this country for front load washers?????
    Possibly because they offer several advantages over Top loaders

    they use less water and electricity
    suitable for people who have limited space

  4. #14
    Rangier Rover Guest
    Quote Originally Posted by Sprint View Post
    wtf is with people deveoping a fetish in this country for front load washers?????
    8 KG top loader can use up to 150 ltrs or more. The 8 kg front loader of our choice only uses a max of 55 ltrs. We are short on water here at times as is is. No one makes sud saver top loaders so have been forced into the front loader market Personally I hate the bloody things. Slower and to much electronic nonsense. Take near 1/2 an hour to set a programme to wash then if the power drops out its buggered

  5. #15
    Join Date
    Dec 2007
    Location
    Central Queensland
    Posts
    3,468
    Total Downloaded
    0
    biggest issue i have with front loaders is that i've seen so many of them with terminal issues.... good quality, mechanically timed top loaders are virtually bulletproof and easy to fix when they do fail

  6. #16
    mike 90 RR Guest
    Quote Originally Posted by Sprint View Post
    wtf is with people deveoping a fetish in this country for front load washers?????
    Cheap
    Better for your linen ... Less lint count loss = clothes not wearing out = looking like new
    Easier to load & unload ... You have to put them on a 400 to 600mm high plinth
    Space saver ... Place your front load dryer directly on top of the front load washer
    At the price they are ... Don't repair ... buy another new one
    Use any detergent .... doesn't have to be "Front Loader specific"
    Use half of the detergent recommended when washing standard stuff ... IE not greasy

    Top loaders with agitator are absolute antiques IMHO ... Don't believe me?? .. have a look at how much lint is caught up in the sink drain plug ... That lint is your hard earned Dollars that you spent on your clothes and bed sheets and towels .... F/P's are especially guilty of this ... I have the holes in the towels & sheets to prove it

    Mike

  7. #17
    Rangier Rover Guest
    Looks like our insurer may extend to this. I recon there will be over 10k in damages to fix it properly. An accessor is coming next week. So I can't touch it for now. Just drop a bit of ply over the hole.
    I'm going to have to set up a temporary laundry some how as I can see this taking over a month

    On the washing machines.... If a had plenty of water I would have got a Commercial Whirlpool Top loader. They look simple and robust. (Bit like my 120" Land Rover ) You could near run a center pivot irrigator on the water it would use though.

    Thanks all for the input. Thanks NM for inspiring me to lodge a claim.

  8. #18
    Join Date
    May 2002
    Location
    Heathcote (in "The Shire")
    Posts
    5,348
    Total Downloaded
    0
    Quote Originally Posted by Numpty's Missus View Post
    Ask a washing machine repairer to recommend a washing machine and they nearly always say "an old one"

    Sadly, new whitegoods seem to be manufactured with a self destruct timer that goes off at exactly 5 yrs and 1 day
    Had our machine (top loader) repaired the other day, 7 years old cost $110 (supply and fit new part)

    His recommendation - stay away from front loaders, although he didn't expand on why.


    Martyn

  9. #19
    Rangier Rover Guest
    Major work has commenced on the old laundry today and as usual there is always something wrong or dodgy when you pull a floor up This house was extended in the early 80s and was not tied in at all We had bearers and joist but was secured only by the floor in one part Also had a dry hold me up in a very bad place. When the ground swelled from the damp it pushed the bloody floor up and stuffed everything. Always wondered why the kitchen (On the common wall) was having cabinet problems and the hall door would only swing in dry weather. That would be most of the time here

    A few extras on top of the quote. I'm used to that here now. Make an estimate and double it usually come close

    I'm still not real sure about the front loader washing machine yet Seems to take a long time to get the job done and shakes the whole house on spin cycle Wish I got a top loader now as on hard water as well



    This shows the extra timber bolted on that now ties the house together in some form. Also dug three barrow loads of builders waste out from this small area Nothing worse than crawling under a house and getting struck by a sharp edge.


    Now is the time to put a power point in the kitchen cavity for the dish washer Not sure how it appeared there



    New floor going in.




    Walls now relined and set. Off to Gunnedah on Thursday to find some tiles.
    Attached Images Attached Images

  10. #20
    Join Date
    Dec 2007
    Location
    Central Queensland
    Posts
    3,468
    Total Downloaded
    0
    my choice for washing machines are either commercial spec maytag or simpson top loaders.....

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!