tThat is what I meant to say except that the original circumference is not relevant Somehow I managed to do the maths back to front or upside down.
The circumference of 2 times Pi times radius (2r). It makes no difference what the starting radius is, an increase of 5 metres in the radius means an increase of about 30 metres in the circumference.
The straight bits and the bits that curve the wrong way don't change that. It is still about 30 metres further if you go around in the outside lane.
1973 Series III LWB 1983 - 2006
1998 300 Tdi Defender Trayback 2006 - often fitted with a Trayon slide-on camper.
Circumference of 2∏(r+n) means for every n metres increase in radius the total circumference increase by an additional 2∏n metres.
For what its worth we did just over 25,000km on our trip this year and I don't think it would have mattered which way we went. That included an anti-clockwise tour of Tasmania.
MY15 Discovery 4 SE SDV6
Past: 97 D1 Tdi, 03 D2a Td5, 08 Kimberley Kamper, 08 Defender 110 TDCi, 99 Defender 110 300Tdi[/SIZE]
I don't pay for fuel and I lost the job a few months ago due to the company being sold and the new owners using there own transport.
I will be looking for a new job next year as SWMBO(the minister of finance) has approved a new puma if I can get another part time job.
Dave.
and if you go the same way twice you will overwind and break the springSome Also say that if you go clockwise by the time you finish your wound up,
But by going the other way you actually un-wind..![]()
You are of course correct. Regardless if the road is a perfect circle or a rectangle with radiused corners, the distance will be 2.pi.lc where lc is the difference between the lane centres.
If we assume that is 5 m then the difference works out quite neatly to be pi.10.
However, basic geometry aside, a difference of 31.xx m on a journey of 20000000+ m can be considered negligible, and possibly immeasurable in an actual experiment (i.e. if you got two identical vehicles and actually drove them round in opposite directions.).
As kind of pointed out already, the difference is the same as the difference between driving around your block clockwise and anti-clockwise.
The question really should be, which way has more up-hill sections? Better to go the way with the most down-hill bits.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks