Reply With QuoteAfter saving the track file can you just then open it and then follow it somehow ?Originally Posted by incisor
SysAdmin (Owner)
Hi
whats the best / easiest way to get an ozi track file over to a route file?
TIA
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
LordRover
SubscriberAfter saving the track file can you just then open it and then follow it somehow ?
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
ForumSage
Just maybe... if you've been there before and had a track file from that visit.... you might want to turn it into a route file..... for the next time...
I'm watching this one with interest....I'm not sure of the answer and would like to use Ozi..... just need some time to mess around with it....
Mark
Mark
Of all the things I've lost, I miss my mind the most
2015 TDV6 D4.... the latest project... Llams, Traxide, Icom 455, Tuffant Kimberleys and Mofos.... so far.
2012 SDV6 SE D4 with some stuff... gone...
2003 D2a TD5...gone...
2000 D2 V8...gone...
https://bymark.photography
SysAdmin (Owner)
you got it in one.......Just maybe... if you've been there before and had a track file from that visit.... you might want to turn it into a route file..... for the next time...Mark
time = got none :P
so was hoping it was an easy one...
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
SysAdmin (Owner)
http://www.ada.ru/GPS/OziMapConverter/index_en.htm
seems to be a neat bit of kit...
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
It seems it's not as simple as loading a track file and saving it as a route file. I think you need to create waypoints along the track file, load the route editor, then add the waypoints into the route editor. This creates a route that can then be saved. Ozi then works out what direction you should head to meet the next waypoint and gives you either a voice prompt or cursor arrow indicating how you should turn.
I'll create a test to get to work tomorrow and see how I go. If this method works I'll explain it in more detail.
Cheers,
John
OK well it took me a little while to reply cause I sent my ECU down to Tombraider to have it flashed and as such had to drive the wifes car to work. The ECU is back.... and I'm a very happy boy now !! but that's another story.
As I thought, the way to get a route together is to load a track file (I use my desktop for this) then create waypoints along the track file at suitable intervals. (turns etc)
Open the Route Editor (View Route Editor)
Click the properties tab
Click "Select All" (waypoints) then "Add"
This creates a route that then needs to be saved.
Click Save - route to file (give it a name)
Copy this file to your PDA (or SD card)
Now on your PDA
Open the route Tool Bar
Open the route, then click the "Forward along route" (Green Icon)
This will highlight the route from waypoint to waypoint.
For fun you can click the arrow icon on the toolbar, and this shows you the direction to the next waypoint (as the crow flies).
This sounds long winded but it's really not that hard.
Give it a try and if you get stuck on my instructions let me know and I'll try and make it a little clearer.
John
YarnMaster
GPS Babel is a useful tool for conversions that has support for Oziexplorer. Will converts routes etc from one format to another, not sure if it will convert tracks to routes.
Garmin gps receivers do this very easily.
http://www.gpsbabel.org
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks