Thread: I begin restoration of a series 2a in Russia

Originally Posted by Don 130

Welcome to the forum Bimmer, and good luck with your restoration. Some photos of your rover in it's new environment would be nice.
I was saving my money years ago to have a trip to Russia, but ended up getting married and buying a house with the money.
Don.

Thanks! It is bad that didn't turn out to visit Russia

Originally Posted by digger

Бумер , Добро пожаловать , хороший серии у вас там. Hemi 245 жетонов также от другого автомобиля - доблестный .
holden6 может быть хороший надежный двигатель и есть многие до сих пор бегают по месту .
с нетерпением ждем , как вы идете ура ! копатель

Спасибо / Thanks!

Originally Posted by reachjatt

Добро пожаловать на форум надеюсь, вам понравится ваш новый приобретения
Nav

Thanks!

Originally Posted by Bimmer

Thanks for the help. I could find only ZL32051 engine number

Hello Bimmer,

According to a number of Holden internet sites your ZL engine is out of a HZ Holden. Years of Manufacture 1977 - 1980. Because your engine has ZL it means it is a later model HZ. Instead of having "202" on the passenger side of the engine block you will have "3.3" cast on it representing 3.3 Litres instead of 202 Cubic Inches.

Have a look at the following link accessed 25th December 2015 from, HZ Holden Specifications


Kind Regards
Lionel

Originally Posted by SG1 Bones

Hey Digger what's that in English?

Thanks
Nathan.

Bimmer, Welcome, a good series you have there. 245 Hemi badge also from another car - Valiant. The holden 6 can be a good reliable engine, and there are many still running around the place.

Enjoy the forum!


Basically hello and welcome just with google translate - best I can
Do as Bimmer is speaking English I thought I'd return the favour!

What an interesting vehicle.
Australian complianced,Holden 6 motor with a valiant 245 engine badge,converted to left had drive sometime and it turns up in Russia.
I bet it has some stories to tell.
Enjoy the rebuild.
Andrew

Originally Posted by Lionelgee

Hello Bimmer,

According to a number of Holden internet sites your ZL engine is out of a HZ Holden. Years of Manufacture 1977 - 1980. Because your engine has ZL it means it is a later model HZ. Instead of having "202" on the passenger side of the engine block you will have "3.3" cast on it representing 3.3 Litres instead of 202 Cubic Inches.

Have a look at the following link accessed 25th December 2015 from, HZ Holden Specifications


Kind Regards
Lionel

Thanks! It is a surprise for me. I didn't know that in Australia made and could install such motor. I will try to look for car history

Originally Posted by LandyAndy

What an interesting vehicle.
Australian complianced,Holden 6 motor with a valiant 245 engine badge,converted to left had drive sometime and it turns up in Russia.
I bet it has some stories to tell.
Enjoy the rebuild.
Andrew

Andrew's thanks!