Page 17 of 21 FirstFirst ... 71516171819 ... LastLast
Results 161 to 170 of 201

Thread: Iveco Daily 4x4

  1. #161
    Join Date
    Mar 2010
    Location
    Mudgee-ish
    Posts
    946
    Total Downloaded
    0
    Good for you. I sincerely hope your trip is everything you expect and more.

  2. #162
    Join Date
    Jul 2011
    Location
    Yarrawonga, Vic
    Posts
    6,568
    Total Downloaded
    0
    How smooth is this


    Iveco Daily 4x4 on corrugations (dash cam) - YouTube

    you can't appreciate the corrugations in the video as we are sitting about a meter or so higher than the Defender, weird how it all looks slightly different from a new perspective

    The Iveco is so smooth and quiet . Granted we have 4 tiers of suspension, first the tyres (which are primary on corrugations) , 2nd the Parabolic suspension, 3rd the flexy Rubber isolation mounts between chassis & cab & then we have suspension seats (for the humungous bumps). you can see the bullbar move in relation to the cab (bullbar solid mount on chassis), the spot tracker reflection in window is velcroed to the dashboard.

    Any speed above 50kmh is smooth. Centerdiff lock wont engage at speed, you have to slow right down .... then you can feel the bumps , its blocked in software don't like that idea much - perhaps its to stop nuff nuffs engaging it on sealed roads ??

    I now understand when we pulled over on the Tanami in the 80 Series for a cup of tea as a respite from the bumps we were agog as a MAN 4x4 bus went past like it was on a smooth road.

  3. #163
    TonyC is offline Wizard Silver Subscriber
    Join Date
    Sep 2007
    Location
    NE Victoria
    Posts
    1,413
    Total Downloaded
    32.83 MB
    Hi Don,
    Any idea what your axle weights are?
    What tyre pressures are you running?

    Don't forget that caravan bouncing along behind on it's little Land Rover tyres.

    Tony

  4. #164
    Join Date
    Jul 2011
    Location
    Yarrawonga, Vic
    Posts
    6,568
    Total Downloaded
    0
    Quote Originally Posted by TonyC View Post
    Hi Don,
    Any idea what your axle weights are?
    What tyre pressures are you running?

    Don't forget that caravan bouncing along behind on it's little Land Rover tyres.

    Tony
    Hi Tony,

    only running 36psi front & rear , TPMS shows they increase about 4 -5 psi with about 2-3 degrees over ambient . haven't lowered them for dirt yet , only done 6500k so far. tyres appear to be wearing even across the tread (the dimples dissapeared very evenly)

    yep, the caravan is a worry, too easy to forget about it as there is no sensation of towing.

    I'll run it over a weighbridge at the next opportunity.

    cheers Don

  5. #165
    Join Date
    Apr 2010
    Location
    Hornsby NSW
    Posts
    734
    Total Downloaded
    0
    More details on the Earthcruiser Iveco Daily.
    Earthcruiser Iveco Models

    Now wheres that unchecked lotto ticket......

  6. #166
    Join Date
    Mar 2010
    Location
    Mudgee-ish
    Posts
    946
    Total Downloaded
    0
    If I got I think I would insist the tyres be the same on each side (look at the far tyre in the shade. To the camera are Hankook Dynapro MT but if you notice that front tyre poking out the other side, it is, I think, a Michelin.

  7. #167
    Join Date
    Jul 2011
    Location
    Yarrawonga, Vic
    Posts
    6,568
    Total Downloaded
    0
    I would have never noticed that, great pickup.



    Still chuffed with mine, best $85,000 I ever spent.

    done just on 20k in mine, absolutely trouble free, (apart from the leaky diff seal on delivery) going in for 1st service on Tuesday , ask me if I'm still happy once I know how much a scheduled service costs.

    (Iveco prefer 40k btwn services but option 20k if you use them off road.)

  8. #168
    Noisy Mango Guest

    Smile

    Hi Don,

    Well I'm asking - are you still happy post service?

    Was wondering if you could do me a favour? Next time you are under the back of your truck with a tape measure - would you mind measuring the spacer on the lower rear shock mount? Ours came loose and lost both spacers. According to the dealer they are unavailable worldwide and they cannot supply any specs.

    On the upside, we now know the Iveco performs really well with no shocks after driving through the Brindabella Ranges without them!

    Thanks,
    Wayne.

  9. #169
    Join Date
    Jul 2011
    Location
    Yarrawonga, Vic
    Posts
    6,568
    Total Downloaded
    0
    Quote Originally Posted by Noisy Mango View Post
    Hi Don,

    Well I'm asking - are you still happy post service?

    Was wondering if you could do me a favour? Next time you are under the back of your truck with a tape measure - would you mind measuring the spacer on the lower rear shock mount? Ours came loose and lost both spacers. According to the dealer they are unavailable worldwide and they cannot supply any specs.

    On the upside, we now know the Iveco performs really well with no shocks after driving through the Brindabella Ranges without them!

    Thanks,
    Wayne.

    Hey Wayne,

    Welcome to the club

    Not sure what you mean , I can't see any spacer on the lower rear shock mounts. The top mounts have spacers which are identical to the front top mount spacers, Also left and rear lower mounts are identical , so you should be able to measure the lower left rear mount. A photo would help as I might be looking at the wrong part ??

    Thanks for the heads up anyway, I checked mine, all nice and tight.

    The service wasn't too bad, $850 , (cheaper than a LR service , and longer intervals) , no faults, have to be happy with that . Still stoked with the truck !!

  10. #170
    Noisy Mango Guest
    Quote Originally Posted by goingbush View Post
    Hey Wayne,

    Welcome to the club

    Not sure what you mean , I can't see any spacer on the lower rear shock mounts. The top mounts have spacers which are identical to the front top mount spacers, Also left and rear lower mounts are identical , so you should be able to measure the lower left rear mount. A photo would help as I might be looking at the wrong part ??

    Thanks for the heads up anyway, I checked mine, all nice and tight.

    The service wasn't too bad, $850 , (cheaper than a LR service , and longer intervals) , no faults, have to be happy with that . Still stoked with the truck !!
    Hi Don,

    The spacer is no.20 in the attached picture.

    The upside of losing the spacer is we now know the truck doesn't ride much different without shocks after driving without for a day!

    The service price seems reasonable & no faults is always good! Yes, we are really pleased with ours too. Took it on a trip through some of the steepest tracks in the Brindabella Ranges and it performed faultlessly. We didn't even use the lowest gears we had! I don't know what someone coming the other way would have thought when they saw the Iveco climbing over a conservation mound towards them!!

    Let me know what you find,

    Thanks,
    Wayne.
    Attached Files Attached Files

Page 17 of 21 FirstFirst ... 71516171819 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!