Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Retro Fitting the Touch Screen Display, e-Diff and Phone controls

  1. #1
    dominicbeirne Guest

    Question Retro Fitting the Touch Screen Display, e-Diff and Phone controls

    Hi All,

    I have been doing some thinking about how I want to modify my SE Petrol D3, it may well have been cheaper to option up 2 years ago though when I bought it.

    I have seen some posts and links on the forum about retrofitting the phone controls to make the radio function as the phone with the controls on the steering wheel. I am giving this some very serious consideration.

    I also have checked out the e-Diff retro fitting link on disco3.co.uk and think that it could possibly be done, but again the cost needs to be determined before going down this route.

    My main issue though is if I was to do these mods then I would like to also fit the genuine Touch Screen Display to the alcove in the centre of the dash. Does anyone know the part numbers and indicative costs involved as I would like to be able to use the display as it was planned to when installed new.

    To pre-empt anyone's thoughts of "what a looney", no I don't have more money than sense but am planning on some very serious upgrades over time, to the car as I am keeping it until either it or I pop off the perch, hopefully a very long time in the future.

    Waiting with bated breath - so over to you.

    Cheers

    Dom

  2. #2
    Join Date
    Nov 2008
    Location
    where every one holidays, sunny coast
    Posts
    1,712
    Total Downloaded
    0
    save ur money??? look on car sales and wait for a perfect d3 that allready has the things on that you want, then sell ur car an -upgrade-

    the time-money and effort to change it all i cant see it been worth it

    could be done, but worth it,, id say no

  3. #3
    Join Date
    Sep 2008
    Location
    Up a hill in the deer park
    Posts
    662
    Total Downloaded
    0
    Quote Originally Posted by dominicbeirne View Post
    ... I am keeping it until either it or I pop off the perch, hopefully a very long time in the future.
    Have you bought an extended warranty yet ?

  4. #4
    dominicbeirne Guest
    Quote Originally Posted by Neil P View Post
    Have you bought an extended warranty yet ?
    Thanks Neil, it hadn't even crossed my mind. I'll look into that also.

    Cheers

  5. #5
    Join Date
    Jan 2011
    Location
    Mornington, Vic
    Posts
    111
    Total Downloaded
    0

    screen retrofit

    well, i've been wondering this too. So I'm ordered an original screen from the UK, and we'll take it from there.
    i know functions like 4x4 info can be unlocked with the MCV 2 faultmate..

    Guess we'll see.......

  6. #6
    dominicbeirne Guest
    Hi Doddsy,

    Keep us in the loop. If it works for you I will get one and install it as well.

    Cheers

    Dom

  7. #7
    Join Date
    Jan 2011
    Location
    Mornington, Vic
    Posts
    111
    Total Downloaded
    0

    e-diff and screen

    in an added twist, after reading your post i did some research on the e-diff.

    the uk disco3.co.uk site has quite a few articles. It has the picture on the e-diff actuator ontop of the rear diff. Apparently it is the only way to tell for sure you have it.

    So i had a look under my beast, and there it sits atop the diff housing !

    Sweet...

    Clearly worth checking for, I bought my d3 at a RR dealer and he had no idea it was on there..

    here's the link..

    have a look

    DISCO3.CO.UK - View topic - REAR DIFF LOCK ON GS!!

  8. #8
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    Quote Originally Posted by doddsy View Post
    So i had a look under my beast, and there it sits atop the diff housing !
    A pleasant surprise!

    The actuator can be seen from either side by peering over the top of the tyre when at off-road height.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  9. #9
    Join Date
    Jan 2011
    Location
    Mornington, Vic
    Posts
    111
    Total Downloaded
    0

    Talking E-diff

    It sure can

    Gotta love these forums..

  10. #10
    Join Date
    Apr 2011
    Location
    Austin, TX, US
    Posts
    149
    Total Downloaded
    0
    Some SE's were shipped with the "heavy duty package" as LR refers to it. This would include the rear e-diff / locking rear diff. If you kept your original specifications page the car was delivered with, it would be listed there as well. Luckily I had to foresight to know I wanted it at the time of purchase.

    It has been retrofitted into vehicles that it did not come with, it's a big project, due to wiring loom considerations. You can find a how to on the same disco site. Discussion link on the subject of retro fitting is here.. http://www.disco3.co.uk/forum/topic52473.html

    I can supply a diff with 12mo unlimited mileage warranty should the need arise (or parts to rebuild your diff)

    G'day

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!