Page 1 of 5 123 ... LastLast
Results 1 to 10 of 46

Thread: Fixed me Black smoke and other things

  1. #1
    Join Date
    Jan 2010
    Location
    Newman WA
    Posts
    889
    Total Downloaded
    0

    Fixed me Black smoke and other things

    Missus was complaining loosing abit of power and the cloud of Blacksmoke on take off from the TDV6 .
    Found a 6 inch split in the aftercooler outlet to manifold Hose


    While I was at it also did the complete EGR block off trick using the BAS kit , goes heaps better now than it ever did , without smoke !!


    Also clean out oil build up in aftercooler

    Good idea to check your own , if you have a oil lesk from the RHF of engine or you hsve oil on the top bsck of hose, lets the boost go out the split instead of into the Manifold !!


    and while I was at it , fitted some nice slotted rotors and Kevlar pads for under $300 !!!

  2. #2
    Join Date
    Mar 2008
    Location
    Sydney, Australia
    Posts
    2,351
    Total Downloaded
    0
    Good Job.

    Which rotors and pads?
    I found the DAB, even normal ones were more than OEMs.

  3. #3
    Join Date
    Jan 2010
    Location
    Newman WA
    Posts
    889
    Total Downloaded
    0
    Got em of fleabay , Obviously have to have right and left discs if slotted , far superior with the Kevlar Pads than the OEM stuff , lets see how long they last !!!

  4. #4
    Ean Austral Guest
    Can you tell me what year your car is?

    Am interested in the EGR block off you mention.

    Are silicon hoses an option for the TDV6, I know the TD5 had a common problem with de-laminating, but yours is a split..



    Cheers Ean

  5. #5
    Join Date
    Mar 2010
    Location
    Sydney
    Posts
    45
    Total Downloaded
    0
    Mine was suffering the same lack of power and black smoke, took it to the mechanic and they advised me of the exact same problem with the intercooler hose. Now fixed, runs like new again.

  6. #6
    Join Date
    Aug 2010
    Location
    Sydney
    Posts
    1,874
    Total Downloaded
    0
    Quote Originally Posted by Ean Austral View Post
    Can you tell me what year your car is?

    Am interested in the EGR block off you mention.

    Are silicon hoses an option for the TDV6, I know the TD5 had a common problem with de-laminating, but yours is a split..



    Cheers Ean
    Hi Ean, I see your D3 is an 08 model so unfortunately you cannot blank off the EGR valves as it will bring up an error. 05 / 06 models you can no problems.
    Re the silicon hoses:
    Discovery 3 & RangeRover Sport 2.7L TDV6 silicone inlet manifold intercooler hose | Diesel performance tuning and economy remap chip tuning for Landrover Defender Discovery TD5 Puma TDV6 TDV8

  7. #7
    Join Date
    Jan 1970
    Location
    Yinnar South, Vic
    Posts
    9,943
    Total Downloaded
    0
    Quite common on tdv6, was out the bush with one that travelled 70k total that had the same, poor mileage, lack of power

  8. #8
    Join Date
    Oct 2009
    Location
    adelaide
    Posts
    291
    Total Downloaded
    0
    Had one go on my defender a couple of years ago, in the middle of no were. A beer can cut diagonally to form a spring, then wrap it around the pipe followed by wire then force tape, Got me home no smoke and full power ( if there is such a thing in a defender )

    connock

  9. #9
    Join Date
    Jan 2010
    Location
    Newman WA
    Posts
    889
    Total Downloaded
    0
    Yes mine was a 2005 TDV6 , so No error messages after fitting the BAS EGR Blockoff done 160000K . Wish Id just did the hose first and taken it for a spin to see the difference . Its now 2 car lenghths faster to 100K than the mates 2009 TDV6 . I pulled the Butterfly out of the inlet tract , cleaned out the muck in the Y - piiece and the hardest job was flushing the aftercooler . All worth it ,goes so much bette, ill see how the Fuel consumption goes with a quick spin to Newman and back 2500K tomorrow.

  10. #10
    Join Date
    Mar 2008
    Posts
    174
    Total Downloaded
    0
    Thanks for that ponga... just had my split hose replaced at around 160 thou also. Haven't done the EGR thing though so will interested to see what your economy comes in at now. Mine averages around 12 but after the hose swap, it sits more like 11.5, marginal but certainly consistently lower... a bit.

    The D3 certainly flies again... ball joints next.. grrrr.

    Cheers.

Page 1 of 5 123 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!