Results 1 to 4 of 4

Thread: RWC project

  1. 10th November 2011, 07:23 PM #1
    Graeme
    Graeme is offline Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0

    RWC project

    I've decided to build my own RWC to be attached to the original steel bumper as per most D3/D4 single RWCs. The plan includes allowance for a 2nd wheel on the left (tyres max 31.5" dia) for the occasional outback trip, with the arm only being fitted when 2 spares are desired. I'm hoping to find a suitably slim catch that can be mounted above the park distance sensors. I'm considering attaching the light cluster(s) to the rims rather than in the bumper for better visibility. The building wont start until early next year due to time constraints but that will provide more think time anyway.

    Any suggestions would be appreciated.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  2. 11th November 2011, 12:36 AM #2
    Nomad9's Avatar
    Nomad9
    Nomad9 is offline Wizard
    Join Date
    May 2007
    Location
    Byford, WA
    Posts
    1,317
    Total Downloaded
    0
    Hi Graeme,
    I would just be wary of the legal requirements fitting a wheel carrier especially a home made one. I fitted a genuine ADR supposedly compliant dual wheel carrier only to be caught out over the pits with no rear reflectors showing and obscured reversing lights.
    Not sure how you will go with the reversing sensors, I wish you the best of luck there, mine stopped working when I put the tow hitch in........
    Reply With Quote Reply With Quote
  3. 11th November 2011, 05:46 AM #3
    Graeme
    Graeme is offline Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    I am aware that there are ADR requirements for visibility angle and heights for lights and reflectors and the light for the rear number plate. I'm not aware of any restrictions on RWCs (or bike racks etc) being home-made.

    I'd like to find out what brand of catch Kaymar use as I suspect they don't make their own.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  4. 11th November 2011, 06:26 PM #4
    Nomad9's Avatar
    Nomad9
    Nomad9 is offline Wizard
    Join Date
    May 2007
    Location
    Byford, WA
    Posts
    1,317
    Total Downloaded
    0
    Hi Graeme,
    In regard to home-made I don't think there are any, there are to many around to be illegal. Mines a Kaymar, I'll have a look tomorrow, I don't remember seeing a brand name and the bracket is actually welded to the frame, could well be a Kaymar bracket.
    Reply With Quote Reply With Quote
« Locking diff options | D3 Tow Hitch Key »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!