try one from the lights or the wiring for the FBH?
Hey all,
This is for all you LR wiring gurus out there. I am currently wiring in a ARB compressor and it is mounted in the engine bay on the left hand side beside the brake master cylinder. It is a tidy install and hidden away under the cover. Is there any wires there that come from the ignition that I could tap into for my switch?
There is a lot of wires there as well as the transfer case module but I'm not to sure.
Regards Billy![]()
try one from the lights or the wiring for the FBH?
As long as it is fused, or has a good circuit breaker, why not wire direct to battery. They generally draw a few amps. You may need a relay if wiring through a positive feed such as the acc plug.
D4 2.7litre
FBH: Fuel Burning Heater, we don't get them here but there you may findthe wiring for it in front of tyhe battery box. Not sure if it has a live ignition or not.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks