try one from the lights or the wiring for the FBH?
Hey all,
This is for all you LR wiring gurus out there. I am currently wiring in a ARB compressor and it is mounted in the engine bay on the left hand side beside the brake master cylinder. It is a tidy install and hidden away under the cover. Is there any wires there that come from the ignition that I could tap into for my switch?
There is a lot of wires there as well as the transfer case module but I'm not to sure.
Regards Billy
 ChatterBox
					
					
						ChatterBox
					
					
                                        
					
					
						try one from the lights or the wiring for the FBH?
 Wizard
					
					
						Subscriber
					
					
						Wizard
					
					
						SubscriberAs long as it is fused, or has a good circuit breaker, why not wire direct to battery. They generally draw a few amps. You may need a relay if wiring through a positive feed such as the acc plug.
D4 2.7litre
 ChatterBox
					
					
						ChatterBox
					
					
                                        
					
					
						FBH: Fuel Burning Heater, we don't get them here but there you may findthe wiring for it in front of tyhe battery box. Not sure if it has a live ignition or not.
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks