I had the same experience for my D3 and since then found the part number in the FAQ section of this forum. Should be cheaper in the local auto shop.
I agree that the dealer price is over the top.
Solitaire Auto in Adelaide quoted me (IIRC) $180 to replace the wipers on my D3. THis is obsurd, rude and offensive!!!!!
WHat are other people's experiences with wiper replacement? I can get a pair of blades from the UK for around 40 pounds plus delivery.
I am fed up with being ripped off for car parts in Australia. No wonder people buy off the net so often!![]()
I had the same experience for my D3 and since then found the part number in the FAQ section of this forum. Should be cheaper in the local auto shop.
I agree that the dealer price is over the top.
How do the after-market parts rate???
LR want approx $54.00 for each D4 front wiper!
Bosch make an aftermarket blade which you can get from your loacal auto store that is for all intents and purposes the same as the LR blade and it's just as good. They sell for around the $25.00 mark.
For the rear blade you can use a generic type and cut to length.
It works for me!![]()
That means my dealer was going to sting me about 45 minutes labour to replace the blades (1 minute job). Thieves........
Will try after-market.
Land Rover dealers are the not the only stealers. My Audi dealer ripped me off for $158 for the wipers for my TT. They changed them and then charged me
My D3 wipers are aftermarket and as far as I am concerned, they are better than my original OEM ones.
I have generic Repco blades of the correct length in my RRS - $12 for the pair.
Garry
REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
Unless you have funky type of fitting as used on some later Fords just get onto e-bay and order up a Euro flat blade or two at the correct length. You should not have to pay more than $6 shipped and they are great blades. If you have an odd fitting all is not lost, you can still get the odd type for a few more $$.
I believe D4`s use a 22" standard hook fitting blade, still check that yourself
http://www.ebay.com/itm/1-Car-Framel...&forceRpt=true
I get mine from Repco - about $15 from memory. Works for me.
cheers
Costco sell Goodyear blades, $8 each for the RRS. Leagues ahead of the OEM ones and last quite well.
I have 2 spare sets in the garage![]()
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks