Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22

Thread: Newby!!

  1. #11
    Join Date
    Jun 2013
    Location
    Brisbane
    Posts
    30
    Total Downloaded
    0

    Thanks for the welcome...

    Thanks to all who have replied. Kind words by all.

  2. #12
    Join Date
    Apr 2012
    Location
    Sydney
    Posts
    791
    Total Downloaded
    0
    Picked it up yet???

  3. #13
    Join Date
    Aug 2012
    Location
    Melbourne
    Posts
    316
    Total Downloaded
    0
    Good on you,
    Here are a couple of things that ****ed me off which you seem to be already seem to be aware off,
    My transmission stuffed up (I wish the dealer could have recommended an oil flush but he didn't and said it wasn't a known issue)
    Suck it up Steven 6 grand ..........
    Also be prepared for niggley little electrical issues mirrors not moving in reverse, reverse sensors making interesting noises and the such.....
    This is commonly known as character!!!!!!
    You have bought a big lump of fun metal,
    Enjoy and Welcome.... Feels weird saying that as it was only ten months since I was in your shoes.....
    EXCITEMENT!!!!!!!!!

  4. #14
    Join Date
    Aug 2011
    Location
    Brisbane
    Posts
    188
    Total Downloaded
    0
    Quote Originally Posted by AnD3rew View Post
    Best cruiser you will ever drive, enjoy. Sadly though, like us Diesel drivers you will have to fill up every couple hundred km's

    Watch the section between coffs and the Gold Coast, can be hard to find a servo if you miscalculate on some of that section.
    Still get 650 to 700km easily on a run so should only need to fill up once from Sydney.

  5. #15
    Join Date
    Jun 2013
    Location
    Brisbane
    Posts
    30
    Total Downloaded
    0

    Got it then

    Hello all

    Just to keep you up to date. We ventured to NSW and took a look at the beast. All was well and smooth as silk. Got a bit lost on the test drive but that was no concern as it was all a pleasure. Did the deal and headed back to Sunny QLD arriving just today. Journey was great and only 200 bucks of fuel for the 1100K journey. Not bad for the V8! Decided the dealers attempt at a detail was pretty ordinary so gave here a good internal clean.
    Then the problem struck. No biggie I hope!! but when I started her after the clean a noise from the back end like like something was wuring!!! and the indicator on the dash indicated the car was permenantly lifting. When an adjustment is made to the ride height the noise stops but then starts again??? All this while stationary. But noise continues if in motion. No alarms from the system?? Any ideas???

  6. #16
    Join Date
    Aug 2011
    Location
    Brisbane
    Posts
    188
    Total Downloaded
    0
    Quote Originally Posted by Diverre View Post
    Hello all

    Just to keep you up to date. We ventured to NSW and took a look at the beast. All was well and smooth as silk. Got a bit lost on the test drive but that was no concern as it was all a pleasure. Did the deal and headed back to Sunny QLD arriving just today. Journey was great and only 200 bucks of fuel for the 1100K journey. Not bad for the V8! Decided the dealers attempt at a detail was pretty ordinary so gave here a good internal clean.
    Then the problem struck. No biggie I hope!! but when I started her after the clean a noise from the back end like like something was wuring!!! and the indicator on the dash indicated the car was permenantly lifting. When an adjustment is made to the ride height the noise stops but then starts again??? All this while stationary. But noise continues if in motion. No alarms from the system?? Any ideas???
    The noise will be the compressor for the air suspension. Does it stop after a minute or so? Mine sounds like an old Kelvinator on start up but I have no warning signs on the dash.

  7. #17
    Join Date
    Jun 2013
    Location
    Brisbane
    Posts
    30
    Total Downloaded
    0
    Hi preacher

    Yes it does?? sometimes it lasts longer than others??? Should it be doing this??? just does not sound right. It seems to come from just under the left rear wheel arch.

  8. #18
    Join Date
    Jan 1970
    Location
    Perth
    Posts
    2,248
    Total Downloaded
    0
    That's the area for the compressor pump - check under the car (between the sill and the chassis rail) that the lower plastic cover hasn't come off.

    Cheers,

    Gordon

  9. #19
    SBD4's Avatar
    SBD4 is offline A Keeper of the TGO Gold Subscriber
    Join Date
    Dec 2011
    Location
    Bundeena
    Posts
    2,809
    Total Downloaded
    0
    Nothing to worry about,

    The compressor is located in front of the passenger side rear wheel under the car. As the suspension is lowered/raised the compressor replenishes the air in the reservoir (long cylindrical tank under the passenger side of the car). the time the compressor runs depends on how much air needs to replaced in the tank which depends on how much the suspension has been adjusted. If you are not seeing any faults I would not be concerned.

    Note that if you are "mucking around" with the suspension height, you get to a point when the air in the tank is completely depleted and the is system relying on the compressor only to raise the car. At this point the car will raise more slowly - you may also run the risk of overheating the compressor. Best not to fiddle too much...

    Have a look at the manual and various threads here and other forums, you'll find a good deal of info to help you understand what is going.

    EDIT: as Gordon says if the cover has come off it will sound louder...
    Cheers,

    Sean

    “Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.” - Albert Einstein

  10. #20
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    Quote Originally Posted by SBD4 View Post
    as Gordon says if the cover has come off it will sound louder...
    It can make quite a racket if someone has jacked the vehicle under the compressor and has broken the compressor mount bracket.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!