So I finally got a set of two way rods delivered - but confused which way round they go, the pair of holes at the top or bottom?
So I finally got a set of two way rods delivered - but confused which way round they go, the pair of holes at the top or bottom?
Pair at the top....that's the way I had mine.
Gordon will confirm for sure.
From greenovalexperience.com
The GOE Height Sensor rods are a slight twist to c) above - a single rod that has both standard height and "+50mm" settings. You then just switch over the top connection to the chassis (once you are familiar with the components, it takes about 10s per wheel) prior to getting onto the rough stuff. You can do this whilst airing down, for instance. Another 10s per wheel when your finished and you're back to normal height again. They are also easily removable, and the standard rods can all be refitted in a matter of minutes to bring the vehicle back to factory spec.
Brett.
 Master
					
					
						Master
					
					
                                        
					
					
						What the diff between 2 way and 3 way rods?
How much is postage to Sydney?
Cheers
http://www.greenovalexperience.com/#!eas/cl9p
Half way down the page it will give you the answer for the 3 way rods.....just before the emergency inflation kits.
An extra height for a couple of dollars more.
Brett....
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks