Thread: Opposite lock gear

Originally Posted by garrycol

Likewise the ones I have seen on a RRS seem to have the gaps all wrong due to the curve section at the front of the guards. It looks as if OL have used a standard D3 bar and modified it as needed to fit the RRS but not around the guard area.

Garry

You could always grab a can of Selleys Space Invader, and finish it off with a can of spray paint that is close to your car colour lol.

Brett.....

Hi Brent,
I had ARB fit my bar/snorkell on my old D3 but OL fitted the winch (after I decided to fit one) and Dual batt set up also. Very neat job with attention to detail. Went with the arb bar cos it looked a little neater but not much in it.
Cam

Originally Posted by captcam68

Hi Brent,
I had ARB fit my bar/snorkell on my old D3 but OL fitted the winch (after I decided to fit one) and Dual batt set up also. Very neat job with attention to detail. Went with the arb bar cos it looked a little neater but not much in it.
Cam

We are talking bars for a RRS and ARB do not make one that is certified.

Garry

Originally Posted by discotwinturbo

You could always grab a can of Selleys Space Invader, and finish it off with a can of spray paint that is close to your car colour lol.

Brett.....

Nah, I'd just leave it with primer, no need to top coat it!

While I'm happy with the OL bar, I'm very dissapointed with the people who installed it and my Kaymar rear bar and long range tank. These guys are butchers and although I'm meeting with the owner today I doubt from my previous conversations I will get any resolution.


If you want to know which Opposite Lock dealer to avoid in Sydney PM me and I will give you my story.

I had a winch bar put on my V6 petrol. Happy with the job and quality. Only issue I've had is the connector for the LED indicator on the bar is not real flash and the contacts can work loose. I believe they now use a different connector. Must get around to replacing that one day...

Originally Posted by Boofla

Hi all,

Before I put the OL bar and snorkel on my RRS just after some feedback (first hand only please!) on quality, any issues you have/had and anything else you can say.
You can PM if you want.

Thanks
Brent

Brent have a look here
http://www.aulro.com/afvb/d3-d4-rrs/...d-bullbar.html



Baz.

whatever you do Don't go to OL Penrith