Thread: D4 Rocksliders/steps

Can anyone give some answers regarding sliders:

• Of the APT, GOE & Brad's is the GOE the only alloy ones?
• Will any of these fit with front OEM mud flaps?
• Are they all black powder coat finished? (No LandyAndy I don't want white ones )
• Are the supplied mounting bolts rust proofed or stainless?
• Which ones - if any - require trimming of guards etc? If so what and how much work is required?

Originally Posted by dmdigital

Can anyone give some answers regarding sliders:

• Are the supplied mounting bolts rust proofed or stainless?

• Brad supplies stainless bolts and stainless washers

• Which ones - if any - require trimming of guards etc? If so what and how much work is required?

• Brad's ones need a slight trimming of the guard. Pictures further up in the thread. Took around 5 minutes per guard yesterday with Orangi, using a Stanley blade (box cutter). Dremel can be useful.

The GOE ones:

* are alloy,
* do not detract from the ground clearance under the sills,
* allow fitment of the standard LR mud flaps (if you REALLY want to put them back on!)

Cheers,

Gordon

Has anyone fitted the LR mudflaps with Brad's sliders ??

Originally Posted by StAn_D4

Has anyone fitted the LR mudflaps with Brad's sliders ??

If you're going to fit sliders, this means you're going off road, sooner or later the LR front mud flaps will go

Baz.

My front LR ones are equal parts glue and plastic ... haha !

Originally Posted by Redback

If you're going to fit sliders, this means you're going off road, sooner or later the LR front mud flaps will go

Baz.

Baz, let *you* drive offroad and sooner or later *everything* is going to 'go'.



(Just kidding mate!)

Hi guys am back on the site again, as promised a couple of months ago here are some piccies of my D4 with
Brads Sliders
home made mudflaps (that do not come off when reversing chassis deep in soft sand)
also my original toy on the trailer