Page 3 of 3 FirstFirst 123
Results 21 to 29 of 29

Thread: D3 transmission oil change Interval and results

  1. #21
    Join Date
    Sep 2012
    Location
    Sydney
    Posts
    490
    Total Downloaded
    0
    Quote Originally Posted by Redback View Post
    Just had our 84,000k service done, all fluids and filters, brake rotors and pads, that included the Gearbox flush and pan, transfer case, front and rear diffs, the rear diff had the dirtiest oil, it's an E-Diff and we have used it quite a lot offroad where it was needed

    Complete service including parts and labour $1400

    Baz.
    That sounds pretty reasonable; was that at an independent or a dealer?

  2. #22
    Join Date
    Jul 2012
    Location
    Melbourne, Vic
    Posts
    281
    Total Downloaded
    0
    Quote Originally Posted by Redback View Post
    Just had our 84,000k service done, all fluids and filters, brake rotors and pads, that included the Gearbox flush and pan, transfer case, front and rear diffs, the rear diff had the dirtiest oil, it's an E-Diff and we have used it quite a lot offroad where it was needed

    Complete service including parts and labour $1400

    Baz.
    That's good value!
    Just picked mine up (well SWMBO did, I'm recovering from a knee op!)
    Trans flush, oil was pretty bad apparently, full service, check & adjust park brake, replace pollen filter etc. 153,000km.
    Steel pan was done by a previous owner. All up $1,150. Thank you Midas

  3. #23
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Quote Originally Posted by Redback View Post
    that included the Gearbox flush and pan,
    Baz.
    Baz was that a mega flush or just replacing the gearbox oil dropped doing the pan change.

    Thanks

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  4. #24
    Join Date
    Jan 1970
    Location
    Ellendale Tasmania.
    Posts
    12,986
    Total Downloaded
    0
    Quote Originally Posted by phl View Post
    That sounds pretty reasonable; was that at an independent or a dealer?
    Yes independent, Roving Mechanical

    Quote Originally Posted by Rohan View Post
    That's good value!
    Just picked mine up (well SWMBO did, I'm recovering from a knee op!)
    Trans flush, oil was pretty bad apparently, full service, check & adjust park brake, replace pollen filter etc. 153,000km.
    Steel pan was done by a previous owner. All up $1,150. Thank you Midas
    That's a coincidence I'm recovering front a back injury, the missus dropped the car off and picked it up.

    We had already had the Park brake and pollen filter done.

    Quote Originally Posted by garrycol View Post
    Baz was that a mega flush or just replacing the gearbox oil dropped doing the pan change.

    Thanks

    Garry
    Yes mate, well that's what we asked for, as per ZF instructions.

    Baz.
    Cheers Baz.

    2011 Discovery 4 SE 2.7L
    1990 Perentie FFR EX Aust Army
    1967 Series IIa 109 (Farm Truck)
    2007 BMW R1200GS
    1979 BMW R80/7
    1983 BMW R100TIC Ex ACT Police
    1994 Yamaha XT225 Serow

  5. #25
    Join Date
    May 2007
    Location
    Byford, WA
    Posts
    1,317
    Total Downloaded
    0
    Hi Brett,
    Oil testing in my opinion is more worth while if you are going to continue to test and not do just one snapshot. Trending the data gives more value. I used to do my engine oil on my D3 and based on the trended data I was able to work out that it was more valuable to change the oil filter every 5k and change the engine oil every 10k, this gave the best results for oil cleanliness and oil quality without being wasteful.
    And yes there was a difference albeit marginal using a genuine LR filter and an after market filter.

  6. #26
    Join Date
    Oct 2013
    Location
    Perth
    Posts
    123
    Total Downloaded
    0
    Our D3 is at 194000 and from what I can tell the gbox oil had not been done yet...
    I've had one quote of $800 including parts and labour so far.

    Need to get it done.

  7. #27
    Join Date
    Apr 2012
    Location
    Sydney
    Posts
    791
    Total Downloaded
    0
    Quote Originally Posted by sinistr View Post
    Our D3 is at 194000 and from what I can tell the gbox oil had not been done yet...
    I've had one quote of $800 including parts and labour so far.

    Need to get it done.
    Any weird going-on's with gear changes and shudder and the like?

  8. #28
    Join Date
    Oct 2013
    Location
    Perth
    Posts
    123
    Total Downloaded
    0
    Quote Originally Posted by rb30gtr View Post
    Any weird going-on's with gear changes and shudder and the like?
    I can say there is an occasional shudder on fast acceleration and if going up a steep hill but other than that no issues I can really feel, changes gears smoothly - goes well.

  9. #29
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    Today I did some preliminary investigations for the task of replacing the pan and using a 12V pump to suck out retained oil. I found the 3.0's oil cooler under the front of the engine with the quick disconnect fluid lines very accessible. However my 8mm hex Allen key is in danger of snapping due to the fill plug being very tight. An 8mm hex socket has been added to the shopping list.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

Page 3 of 3 FirstFirst 123

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!