Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 35

Thread: Oil consumption in D4

  1. #21
    Join Date
    Dec 2010
    Location
    Melbourne
    Posts
    291
    Total Downloaded
    0
    Quote Originally Posted by nat_89 View Post
    I thought this was the dipstick I haven't pulled it out just a guess, but I could be wrong [IMG][/IMG]
    Perhaps its a breather? Sneigy will know.

  2. #22
    Join Date
    Jul 2008
    Location
    Eastern Suburbs Mexico Vic
    Posts
    456
    Total Downloaded
    0
    Quote Originally Posted by letherm View Post
    This ties in with what my dealer said about the inaccuracy of the oil gauge and about not overfilling.
    same, dropped mine in for a top up, dealer let it sit then told me it did not require topping up, even though it was just over half full. Said it was better to underfill than overfill, as they have lost engines due to overfill as they are extremely sensitive.

    I think i will just stick to regular oil changes (changed oil at 10K) car is in for service next week, 20k. However have never seen the gauge at the full point.

  3. #23
    Join Date
    Sep 2007
    Location
    Kiwiland
    Posts
    7,246
    Total Downloaded
    0
    Quote Originally Posted by giskard View Post
    Thanks for the advice gang. There are 4 notches above the halfway point. So, at least visually, about 40% of the oil has been consumed.

    Will call the dealer tomorrow and try to pop it in.

    Cheers.
    40% of the way between the marks is not 40% of the oil in the engine.

    What do you lot hope to achieve with me frequent oil changes?

  4. #24
    Join Date
    Oct 2013
    Location
    Old Toongabbie, Sydney NSW
    Posts
    1,273
    Total Downloaded
    0
    Quote Originally Posted by Dougal View Post
    40% of the way between the marks is not 40% of the oil in the engine.

    What do you lot hope to achieve with me frequent oil changes?
    Interesting comment. I assumed that the display represented the total oil volume. It may well show (does anyone know?) a fraction of the actual volume so that the oil is topped before it's too late.

  5. #25
    Join Date
    Dec 2010
    Location
    Melbourne
    Posts
    291
    Total Downloaded
    0

    What is the volume between low and full?

    I know I read this in a post on here.

    Is it 150 mls per notch??

  6. #26
    Join Date
    Dec 2013
    Location
    Queensland
    Posts
    4
    Total Downloaded
    0
    At the half way mark on the readout a message popped up advising that 0.5 of a litre should be added

  7. #27
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    2,622
    Total Downloaded
    0
    Quote Originally Posted by lpj View Post
    Perhaps its a breather? Sneigy will know.
    It is NOT a Dipstick. If you twist it, it will come off. BUT do not leave it off. Will cause issues & vent-engine doesn't like it
    Its a sucker hose connection. That is where you connect the hose that sucks the oil from the engine out (Used for Jaguars as they done have drain plugs-yes its true, same engine different sump!)

    Not sure if the quantities have changed but assume they have? but used to be 200mL per notch. It is also true to have the level at one notch down (as this is now how we prepare every new vehicle) but 99% of vehicles now turn up full.

    I wouldn't stress too much over it. It is a NEW engine wearing itself in, there is bound to be some engine oil use.
    Cheers

  8. #28
    Join Date
    Mar 2008
    Location
    Sydney, Australia
    Posts
    2,351
    Total Downloaded
    0
    Yup, both my D3 and the D4 used oil at first then no use at all between services.

  9. #29
    Tombie Guest
    Quote Originally Posted by nat_89 View Post
    I'll agree there I've had mine 2 months and done 10000kms with just the 3000km first service and oil change. Not once has it used any oil but I gave it a good hard run in and have given it a pretty good run when with hard acceleration and quick over taking so not sure if that makes any difference.

    Exactly....

    Bed them in, make them work...

    Mines never used a drop since new.

  10. #30
    Join Date
    Sep 2013
    Location
    Australia
    Posts
    100
    Total Downloaded
    0
    Just a quick update guys. Popped it back to the dealer. They topped up and it's reading full again. Good to know the indicator isn't showing total capacity. Dealer wasn't too concerned. Said usage varies, but not too much to worry about.

    Thanks for the tips and advice. I'll keep an eye on it. Will be interesting to see how it goes.

Page 3 of 4 FirstFirst 1234 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!