Thread: driving lights power source D3?

Hi winaje, and there is a tapped 8M hole on the top of the cranking battery’s positive ( + ) terminal but you MUST NOT connect anything to the cranking battery’s negative ( - ) terminal, as this will interfere with the D3’s BMS.

For the positive terminal, you can use an 8M x 12mm bolt and job done.

For the negative connection, if you have a look at the inside of the guard, just in front of the cranking battery’s plastic compartment, you will see two 6M studs. You can use these for the negative connection.

Thanks drivesafe , just check over mine on the week end and they have earth the winch to the neg side so i will change it over

You may find this of assistance too:

Originally Posted by sniegy

Back of the Headlight. In the plug itself.
From memory Blue/Black R/H or Blue/Slate L/H headlight.
This is where i picked up my high beam switch wire from & many other customers.

Cheers