D4 Steering column Shroud removal help please

**Bytemrk** · 20th July 2014, 10:58 AM

1/2 way through doing my Llams install - all working swimmingly.... connected and tested - works perfectly.

Just tidying up, mounting the reset and control switches and I want to put the controller in my steering column.

I've removed the two torx screws at the front and the casing separates - but something appears to be holding it at the back and I cant see what.

Anyone give me a pointer what I'm missing?.... I dont want to get too brutal and break something.

**Graeme** · 20th July 2014, 11:13 AM

There's a 3rd screw further back on the RHS.

**Bytemrk** · 20th July 2014, 11:15 AM

Thank you!!.... obviously need to clean my glasses

**Graeme** · 20th July 2014, 11:16 AM

I'd forgotton how to remove the covers and then had to get a torch to see the screw.

**Bytemrk** · 20th July 2014, 01:56 PM

All done and working perfectly!... Thank you

Tombie · 20th July 2014, 03:01 PM

Originally Posted by Bytemrk

All done and working perfectly!... Thank you

No pics; didn't happen

**Bytemrk** · 20th July 2014, 05:40 PM

Originally Posted by Tombie

No pics; didn't happen

Seems I got sidetracked by a mate and beer......no light now.

Will grab some shots tomorrow - very happy with the result.

**Bytemrk** · 21st July 2014, 12:30 PM

Here we go Tombie...and others interested

I located the Llams controller switch in the steering column...hence this thread.

Now I can be REALLY low for those silly city car parks...

(Lams and car both as low as possible)

or way up high when I need that little extra....

(Lams and car both as high as possible)

And lots of combinations in between.

Far easier than the lift kit I installed to the D2a.

...and no bleeding knuckles

Thread: D4 Steering column Shroud removal help please

Thread Tools

D4 Steering column Shroud removal help please

Bookmarks

Bookmarks

Posting Permissions