Results 1 to 7 of 7

Thread: Check engine light, when does it disappear?

  1. #1
    Join Date
    Jan 1970
    Location
    Wantirna South, Vic
    Posts
    1,459
    Total Downloaded
    0

    Check engine light, when does it disappear?

    Hi all. Installed a Safari Snorkel on the D3 yesterday, and in reassembling the intake tract I forgot to connect the plug to the MAF. Drove a short distance this morning, found the problem, reconnected it etc. The question is though, how long does it take for the light to disappear, or is it a hard code that requires clearing with a Nanocom or similar? I haven't upgraded my Nanocom and bought the cable yet...
    Regards, Will

    Stornoway Grey '09 D3 TDV6 SE, 2015 TERRITORY Engine at 348k
    LLAMS, FYRLYTS, OL D4 Bar
    Safari Snorkel, D4 hitch, ARB CKMA12

  2. #2
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    Hopefully its just one of the faults that requires a particular number of error-free starts before it wil be cleared rather than a totally-unrelated fault eg EGR.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  3. #3
    Join Date
    Jan 1970
    Location
    North West Tasmania
    Posts
    869
    Total Downloaded
    0
    What about a hard reset

  4. #4
    Join Date
    Jan 1970
    Location
    Wantirna South, Vic
    Posts
    1,459
    Total Downloaded
    0
    Thanks Graeme, after about 6 restarts over a couple of hours the light disappeared.
    Regards, Will

    Stornoway Grey '09 D3 TDV6 SE, 2015 TERRITORY Engine at 348k
    LLAMS, FYRLYTS, OL D4 Bar
    Safari Snorkel, D4 hitch, ARB CKMA12

  5. #5
    Join Date
    Apr 2008
    Location
    Adelaide SA
    Posts
    2,517
    Total Downloaded
    0
    Last time I had the "Check Engine" light come on in a car, I lifted the bonnet & made sure the engine was still there.

    What I don't understand is, where is the light to tell you the "check engine" light isnt working???

  6. #6
    Join Date
    Nov 2010
    Location
    Adelaide
    Posts
    303
    Total Downloaded
    0
    All the lights are supposed to come on at initial start so you can see they're working.

    Trouble with the Disco is there are so many damn lights you don't have enough time to check them all.

    The wife's D3 (S) is also a pain with the service warning light. Unless you are watching carefully you miss it entirely. Its not obvious, and is shown for a very short time while all the warning lights are on for you to check they're working.

    You'd think with all the electronics they'd be able to tell you a warning light has failed, hell my series 2a had a warning light for rear brake light failure (although the Army might have fitted that...)

  7. #7
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    Quote Originally Posted by theresanothersteve View Post
    You'd think with all the electronics they'd be able to tell you a warning light has failed
    Then need more electronics to check that the electronic lamp checking is working....
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!