Results 1 to 4 of 4

Thread: Front Brakes - Torque/bolts

  1. 20th October 2015, 03:47 PM #1
    JayBee75's Avatar
    JayBee75
    JayBee75 is offline Master
    Join Date
    Jul 2008
    Location
    Eastern Suburbs Mexico Vic
    Posts
    456
    Total Downloaded
    0

    Front Brakes - Torque/bolts

    Hi guys,

    have got new discs and pads that I am going to fit to my D4.
    the two main bolts (not the top half secondary ones) is there a special tool to get them off? or any recommendations on best way to release them?

    secondly when re tightening what are the factory torque settings for them?

    obvious want to get this right with front brakes being a big safety thing with a 2.5t plus car...

    Thanks
    Jonathan
    Reply With Quote Reply With Quote
  2. 20th October 2015, 05:09 PM #2
    Graeme
    Graeme is online now Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    The bolts are normal 12-point/double hex. They're quite tight!

    Tightening torque - from the WSM:

    22. Install the brake caliper anchor bolts
    Tighten the bolts to 115 Nm (85 lb.ft).

    I use thread locker as I don't like suspension or brake bolts working loose.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  3. 20th October 2015, 05:14 PM #3
    JayBee75's Avatar
    JayBee75
    JayBee75 is offline Master
    Join Date
    Jul 2008
    Location
    Eastern Suburbs Mexico Vic
    Posts
    456
    Total Downloaded
    0
    Cheers Graeme much appreciated.

    will a standard socket do the trick? dont want to strip, obviously.....
    Reply With Quote Reply With Quote
  4. 20th October 2015, 06:36 PM #4
    Graeme
    Graeme is online now Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    A 1/2" drive socket and breaker bar should do although I may have used a 3/4" drive socket and bar.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
« TPMS on D3 | Brakes by non-LR mechanic? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!