Reply With QuoteHi Graeme is this a job for body on??? Surely not???
😮
Jc
Swaggie
The version of the D4 WSM that I have shows a timing mark on the cam pulley in step 19 as being mid-way between 2 bolts on a spoke yet at installation step 4 with the pulley in the same position the timing mark has moved, now vertical and mid-way between the earlier spoke and the bolt to its right. It seems logical to have the timing mark vertical as per the assembly diagram and with the marks shown in different positions on the pulley, I suspect that step 19 is incorrect. Knowing which one is correct should assist with lining-up the crank-shaft for locking pin fitment.
Can anyone advise which timing mark position is correct please?
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Swaggie
Hi Graeme is this a job for body on??? Surely not???
😮
Jc
The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
Swaggie
Yes JC. I'm expecting mostly by feel with judicious use of a mirror tool and anticipate some skin loss. A pump sprocket locking tool has been obtained.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Swaggie
😕😣 not looking forward to my first one then. Have a hard enough time getting my arms into the d3 and i reckon they have more room 😮.
😭😭😭😭😭
Jc
The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
Swaggie
There will be 2 of us dong the job so can share the frustration and pain.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
A Keeper of the TGO
Graeme, I have "Discovery 4 2009-2011 R & W" published 11 May 2011. Let me know if you want me to check.
Cheers,
Sean
“Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.” - Albert Einstein
Swaggie
Yes please. Hopefully it will agree with one of LR's diagrams.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Super Moderator
SubscriberGraeme, I think that I have a copy of the same WSM as Sean, published 11-May-2011.
It appears to have identical steps 19 and 4 as per what you've described with the same discrepancy in timing marks.
Regards,
Scott
Swaggie
Yes, those are the conflicting pictures.
Its not a show-stopper in any way as the truth will be discovered when looking for the hole to lock the crankshaft.
Picture 4 doesn't have the pump sprocket quite correctly aligned according to the picture at step 3 so picture 4 can only be used as an instruction to align the marks. As picture 3 shows an indent on the pump sprocket, I assume the cam sprocket will have a similar indent and that it will be vertical prior to cutting the existing belt.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Wizard
SupporterIs there a marked position on the belt cover that the timing marks on the pulleys can line up with?
Shane
2005 D3 TDV6 loaded to the brim with 4 kids!
http://www.aulro.com/afvb/members-rides/220914-too-many-defender-write-ups-here-time-d3.html
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks