Thread: Best D4 colour for off-road?

You could Plastidip the car in clear, although I have no idea how many cans it would take, and the cans are $30 each. I have a can of clear, which I am going to do my motorbike with just to make it matte and protect the paint at the same time.

Read on from here Andrew:
http://www.aulro.com/afvb/d3-d4-rrs/...ml#post2498441

Mine is Indus silver and the white of scratches in the clear coat is noticeable at some angles. As with the other lighter colours after a bit of polish they disappear for the most part. What remains are the scratches on the A and B pillars in the black plastic.

Ron

Originally Posted by ~Rich~

Whatever colour - put on Paint Shield or Road Warrior!
Makes you feel at ease through scratchy tracks.
Applied it again before the Anzac W/E and will leave it on until I get back from a Qld trip in July.

Yes, I can attest to Paint Shield at Rich's recommendation. About $109 per 4lt can. The supplier is based just north of Sydney. Use less than 1lt for one thick coat rolled on the bonnet and sides. Second coat for the mirrors to give it better tensile strength for ease of removal. Provides good protection when driving down overgrown tracks. My disco is black and therefore the film doesn't dry out evenly as does on Rich's car. Also, looks like the Milky Way galaxy when it gets wet/damp but dries clear. However, I don't care how it looks as I am only after the protection. I only apply it prior to a trip and remove it thereafter.

Is this the stuff ? http://www.shieldnpeel.com.au/store/...tegory&path=60