Thread: Wiring up LED Light Bar to front of Pioneer Tradie Rack?

Hi there. Just wondering where people run their wiring to power a light bar attached to the front of their racks? Have always had dual cab prior to the purchase of my new 2016 D4 TDV6. Love it.

Most common option is to run the wiring up behind one of the plastic dress strips at the sides of the windscreen. These pop off easily enough, and there is plenty of room behind them for wiring.

I would recommend though that if removing one of these strips, get yourself some replacement plastic retaining clips from your dealer and use them, particularly if you lose or damage any of the original clips when removing the trim. Do NOT use after-market clips - they WILL fail. Genuine LR clips are yellow - cheap after market ones are usually white. Genuine clips are not expensive and are readily available - I carry a spare set in the glovebox.

I found out the hard way about the clips when a windscreen place used cheap crappy clips from Supercheap Auto when I had a windscreen replaced.