Snapped off roof rail bolt. Time to check your factory rails?

Quote:

---

Originally Posted by ~Rich~

BSM - Was the D3 garaged or not?
Also I see you live in Port Melbourne, is salt spray a continuous airbourne concern?

---

Not garaged, just under a car port. Salt spray is not a concern in Port Melbourne, we only have tiny waves in the bay.

Quote:

---

Originally Posted by BSM

Really? It looked welded to me. I certainly didn't try undoing it. If so it must extend below the roofline and have an outer thread below the roofline as well as having its inner thread where the roof rail bolt goes. It that right? I can't see how else it can be a nut.

---

Look at your first Pic!!! [emoji106][emoji48]

Quote:

---

Originally Posted by BSM

Not garaged, just under a car port. Salt spray is not a concern in Port Melbourne, we only have tiny waves in the bay.

---

If you are near the sea, you have salt spray. It's a term but it really means salt infused air blown in the wind.

Any aircraft operator within a short distance of the sea will do desalination servicings on their aircraft. Their planes don't ever get hit by actual spray. The salt is just everywhere. I guess the range of that effect is related to the strength of the winds.

Cheers,

Kev.

Quote:

---

Originally Posted by sniegy

The bit on the roof is a "NUT" if you grabbed a 13mm socket & slid it over the nut & undid the roof nut it would of just come undone & replacements can be ordered from spare parts.

---

What a good idea to have a sacrificial smaller bolt!

Haha this thread is worth it for the read alone, thanks!

This has actually been on my mind. I checked my bolts about a month ago and noticed a couple have gone opaque and look like the start of corrosion is setting in.

Time for some new M6's by the looks, any opinions on galvanized vs. stainless for this job?

Zinc. Stainless will react.

Quote:

---

Originally Posted by Tombie

Zinc. Stainless will react.

---

Do you mean react with the rail or the nut?

Scott

The nut.

The nut?
At which end of the spanner?

Is it the same mounting as shown in these pics?

http://www.aulro.com/afvb/l319-disco...rack-fail.html