Turning lights are a bit fiddly to fit but doable. Hard parts are getting out the chrome dome that fills the globe hole as it is originally fitted before the lens is sealed in place. There are threads on here somewhere. I tied thin wire to each of the three legs that hold it in place then used a hot knife to cut it in three then remove it through the globe hole. I managed to get hold of a damaged headlight and used the pins from the headlight connector to power a globe holder. CCF edit is straight forward but would like to change the speed that they turn off a bit higher. There is a speed there (35km from memory but changing that does seem to alter anything. Might have another play one day.
eBay is your friend here. I only fitted the drivers window one. They do distort the view along the A pillar which is most noticeable at local round-a-bouts but I've gotten used to it.


 
					
					 )
)

 
				
				
				
					 Reply With Quote
  Reply With Quote 
						
					 Originally Posted by Bobc163
 Originally Posted by Bobc163
					
 
						
					 
			
Bookmarks