Hi Bob,
Looks to be glued on...
HTH David
![]()
Hi All,
washing the D4 this morning and noticed that the rear brake light mounted at the top of the rear door was coming loose on one side, towards the front edge.;
I cannot see how this light is mounted to be able to check the fastenings (bolts,clips or glued in)
Anyone have a clue as to how to check/repair this
Bob
Hi Bob,
Looks to be glued on...
HTH David
![]()
Everything is easy when someone else is doing it
MY14 SDV6 SE Corris Grey
Compomotive 18s : D697s : Traxide DBS : LLAMS : ARB compressor : IC-455
Rhino Platform : GOE compressor, Tx & front bash plates, deluxe sliders
My wife backed mine (ours) into a low underground car park and smashed the light on the fire main. I bought a new unit online and took to a window repair shop as you need the window adhesive. Even then they had to do it twice.
I suspect the clean up is critical so you would need to fully remove yours and start again.
Thanks for that
Looks like a good job for a slow weekend
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks