Hi Bob,
Looks to be glued on...
HTH David

 Fossicker
					
					
						Fossicker
					
					
                                        
					
					
						Hi All,
washing the D4 this morning and noticed that the rear brake light mounted at the top of the rear door was coming loose on one side, towards the front edge.;
I cannot see how this light is mounted to be able to check the fastenings (bolts,clips or glued in)
Anyone have a clue as to how to check/repair this
Bob
Hi Bob,
Looks to be glued on...
HTH David

Everything is easy when someone else is doing it
MY14 SDV6 SE Corris Grey
Compomotive 18s : D697s : Traxide DBS : LLAMS : ARB compressor : IC-455
Rhino Platform : GOE compressor, Tx & front bash plates, deluxe sliders
My wife backed mine (ours) into a low underground car park and smashed the light on the fire main. I bought a new unit online and took to a window repair shop as you need the window adhesive. Even then they had to do it twice.
I suspect the clean up is critical so you would need to fully remove yours and start again.
 Fossicker
					
					
						Fossicker
					
					
                                        
					
					
						Thanks for that
Looks like a good job for a slow weekend
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks