Thread: 18 inch 3.0 wheels.

Pic generated from the MAK webpage Car configurator.
anyway email sent requesting all info

Originally Posted by cjc_td5

Website says D4 2004-2009 and not 180kW engine, so I would very much doubt they will fit the larger brakes unfortunately.

Must be looking at a different page to me....
Down the bottom it lists all the fits and shows

Discovery IV LA - 04/2009 >

Lets see what they come back with.....

(Note the other rim that does fit that we don't discuss is made in italy)

Originally Posted by hv_man

Must be looking at a different page to me....
Down the bottom it lists all the fits and shows

Discovery IV LA - 04/2009 >

Lets see what they come back with.....

(Note the other rim that does fit that we don't discuss is made in italy)

Yeah I looked at the top of the linked page initially. Saw the bit you referenced above later. See what they say I suppose...
Cheers
Chris

MAK is another dead end....

Dear Craig,
thanks for contacting us; unfortunately the Highlands 9x18 aren't compatible with the LR Discovery IV 180-188-220 Kw, the brake calipers are too large.
Cordiali saluti/Best regards/Mit freundlichen Gruessen

MAK INFO

I presume the TDV6 155kW brakes are the same as the SDV6 180kW brakes.

I ordered my GOE 18" rims this evening in Satin Black.

Now as posted in the Maxxis thread I have to decide what size tyre? I'm going with Cooper ST Maxx, trying to decide between 265/65/18 or the 275/65/18?

Any suggestions from anyone running either of these sizes?

Originally Posted by cjc_td5

I presume the TDV6 155kW brakes are the same as the SDV6 180kW brakes.

Yes, they are the same.

for clarity, how many KW is the 2011 2.7L D4?

Was MAK talking about ALL D4's or just the facelift model? I have found another option but this time I'll reserve all information until I have physical photos of it fitting..