Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25

Thread: 6 speed zf auto from RRS into D3?

  1. 5th November 2016, 01:44 PM #21
    Discofever's Avatar
    Discofever
    Discofever is offline Master Subscriber
    Join Date
    Jun 2008
    Posts
    297
    Total Downloaded
    0
    Quote Originally Posted by rar110 View Post
    What's it doing? My trannys internals were ok but the output shaft and TC input gear wore away as no lubrication applied. Here's a pic.
    What was impeding lubrication to the shaft and TC gear? It does sound like a lack of lubrication issue - but I have little intel on trannys.
    2006 TDV6 Disco
    Reply With Quote Reply With Quote
  2. 5th November 2016, 02:26 PM #22
    Graeme
    Graeme is online now Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    Only greased prior to fitting the transfer case...
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  3. 5th November 2016, 02:32 PM #23
    Graeme
    Graeme is online now Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    Quote Originally Posted by Discofever View Post
    So there is a metallic scraping sound never present on load. It always goes away when the accelerator pedal goes down. It happens intermittently at idle or when I release the accelerator to slow down. It is present intermittently in reverse and drive, not in park or neutral, sports mode the same. If I turn the car off and back on, it's gone, but inevitably returns. Sometimes it will run fine around town for 15-20 mins and then it rears its ugly head again only to go away for another 10 mins repeat.

    I have no issue with gears slipping, shudder etc. Car drives well and is smooth.
    It sounds as though the noise has nothing to do with the oil change but could be the torque converter or the flex plate disintegrating.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  4. 5th November 2016, 03:15 PM #24
    Discofever's Avatar
    Discofever
    Discofever is offline Master Subscriber
    Join Date
    Jun 2008
    Posts
    297
    Total Downloaded
    0
    If its a TC diagnosis is it worth just replacing TC? Depends on how much damage is in there I assume.
    2006 TDV6 Disco
    Reply With Quote Reply With Quote
  5. 8th November 2016, 05:20 PM #25
    Discofever's Avatar
    Discofever
    Discofever is offline Master Subscriber
    Join Date
    Jun 2008
    Posts
    297
    Total Downloaded
    0
    Well the tranny needs to be rebuilt. The TC was likened to a squashed tomato which is an interesting analogy. It's being done in Melbourne at an indy trannie specialist and will come in at 4.5k

    That said I purchased the car for 11k with 250k on the clock so I effectively have a TDV6 D3 with a rebuilt auto for about 16k.
    2006 TDV6 Disco
    Reply With Quote Reply With Quote
Page 3 of 3 FirstFirst 123
« WARNING! Potential Fire Hazard Interior D4 | DPF Cleaning »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!