Thread: driving light bracket manufacture

Hello folks,


I currently have the genuine LR driving lights on my D3 which are rubbish and I am wanting to fit Fyrlyt nemesis 8000 to it.


The current setup is bolted to a steel flange then extends down through the top of the plastic bar and onto a crossmember. Very rigid and secure.


The top of this flange is about 2" lower than the top of the plastic bar.


I am thinking of getting some brackets made up that can be bolted to the existing flange and will extend up enough to provide adequate clearance for mounting the lights. The part would have a suitable tounge welded to it.


Anybody know a fabrication shop that can do this sort of work? Bit of maching to make the part for the top of the flange I would think.


cheers
P

I had a look at the fleabay listing, it's for a D4 only. I have contemplated getting something made up in similar fashion, just need to find a suitable fabrication shop.


$395 is probably reasonable.


thanks
Peter