Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: Any better price quoted for BFG KO2 265/60R18?

  1. #11
    Join Date
    Apr 2008
    Location
    Brisbane,some of the time.
    Posts
    13,886
    Total Downloaded
    0
    Mine were same size as OP, $385 a corner.

    On my fourth set,all AT,never had an issue, ever.

    And one puncture,a slow leak from a large tech screw in four sets, not to bad.

  2. #12
    Join Date
    Apr 2016
    Location
    New South Wales
    Posts
    693
    Total Downloaded
    0
    At St George tyres (down the street from Tempe tyres) I paid $350/corner fitted and balance earlier this year.

    However, don't buy them if you live in or around a city - the tyre noise at speeds between 40-70km hr is annoying and of course that's the vast majority of driving in sydney.

    Above or below that speed I don't notice them, so no issues for country folk but despite them being a great tyre (functionally) I won't be buying them again.

  3. #13
    Join Date
    Jun 2015
    Location
    Melbourne , Victoria
    Posts
    138
    Total Downloaded
    0
    Quote Originally Posted by Lukeis View Post
    At St George tyres (down the street from Tempe tyres) I paid $350/corner fitted and balance earlier this year.

    However, don't buy them if you live in or around a city - the tyre noise at speeds between 40-70km hr is annoying and of course that's the vast majority of driving in sydney.

    Above or below that speed I don't notice them, so no issues for country folk but despite them being a great tyre (functionally) I won't be buying them again.

    Thanks all all as I just had my BFG fitted, just see how it go. It is a bit pricey than others, Tyre shop and Gordon all recommended NITTO GT2, only around $240, worth to think about it. Any suggestions on Centre wheel cap since LR cap doesn't fitted.

    cheers,
    Gary

    MY15 Discovery 4 White, ARB Summit Bull Bar, Runva 11XP Winch, LLAMS, Icom440, GME 4705 High Gain Antenna, Redarc tow pro elite. 18" GOE Rim & BFG 265/60R18, APT Compressor Guard & Air Tank Guard. Outback Long Range Tank & Spare Wheel Carrier.

  4. #14
    Join Date
    Oct 2013
    Location
    Old Toongabbie, Sydney NSW
    Posts
    1,273
    Total Downloaded
    0
    Quote Originally Posted by DIS4 View Post
    Thanks all all as I just had my BFG fitted, just see how it go. It is a bit pricey than others, Tyre shop and Gordon all recommended NITTO GT2, only around $240, worth to think about it. Any suggestions on Centre wheel cap since LR cap doesn't fitted.

    cheers,
    Another thread had this link. I bought a set. they look good and come with 4 dust caps for the valves as well. Can't comment on fit as I am waiting for the latest delivery of GOE rims to arrive.

    4 pcs BLACK CAR ALLOY WHEEL CENTER CAP HUB EMBLEM BADGE 62mm FOR LAND ROVER

    Martin

  5. #15
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    I have the KO2s in 265/60R18. No problems with balance at fitment or since. Plus I know 5 other D3/4 owners with KO2s in this size, 265/65 or 285/60 and none of them have had issues either.

    I don't find the noise between 50-60kph to be obtrusive or even audible if the stereo is on but that's a personal preference, noise bothers some people more than others.

    Their performance on all types of off-road terrain and surfaces has been absolutely excellent, although I haven't tried (and don't plan to) deep mud. Recent driving on stony outback roads and sharp-rocked station tracks has seen no punctures or significant damage, beyond a few small cuts and nicks.

    The pricing that's been mentioned in this thread is better than when I purchased and I think pretty good for what's expected of them. I don't pay much attention to feedback on a specific tyre in a different rim size and/or rating.

    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  6. #16
    Join Date
    Jun 2015
    Location
    Melbourne , Victoria
    Posts
    138
    Total Downloaded
    0
    Quote Originally Posted by letherm View Post
    Another thread had this link. I bought a set. they look good and come with 4 dust caps for the valves as well. Can't comment on fit as I am waiting for the latest delivery of GOE rims to arrive.

    4 pcs BLACK CAR ALLOY WHEEL CENTER CAP HUB EMBLEM BADGE 62mm FOR LAND ROVER

    Martin
    LR original wheel cap doesn't fit on GOE Rims, it's a bit smaller pulse siver in color. Will check the size on the link.

    Cheers,
    Gary

    MY15 Discovery 4 White, ARB Summit Bull Bar, Runva 11XP Winch, LLAMS, Icom440, GME 4705 High Gain Antenna, Redarc tow pro elite. 18" GOE Rim & BFG 265/60R18, APT Compressor Guard & Air Tank Guard. Outback Long Range Tank & Spare Wheel Carrier.

  7. #17
    Join Date
    Oct 2013
    Location
    Old Toongabbie, Sydney NSW
    Posts
    1,273
    Total Downloaded
    0
    Quote Originally Posted by DIS4 View Post
    LR original wheel cap doesn't fit on GOE Rims, it's a bit smaller pulse siver in color. Will check the size on the link.

    Cheers,
    From memory (albeit vague) there was a picture on the thread showing them on GOE rims - I think

    Martin

  8. #18
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    The Compomotive wheel seems to have changed centre hole slightly. My original centre caps do fit as do the eBay ones but for quite a few more recent wheels the owners find the centre caps do not lock in.

    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  9. #19
    Join Date
    Oct 2013
    Location
    Old Toongabbie, Sydney NSW
    Posts
    1,273
    Total Downloaded
    0
    Quote Originally Posted by LRD414 View Post
    The Compomotive wheel seems to have changed centre hole slightly. My original centre caps do fit as do the eBay ones but for quite a few more recent wheels the owners find the centre caps do not lock in.

    Scott
    I've read in previous threads about using non LR caps that some people put a dab of silicone etc in to give a bit better grip.

    I'll find out soon I suppose. Delivery of GOE rims was slated for end of August/September when I ordered mine. In any case they didn't break the bank. Pocket change in the wide scheme of things.

    Martin

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!