MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
That's what i did, although mine was from a D4 so a more desirable item than the D3 plough. Basically straight change over price between that and a used Mitch Hitch.
As others have said, having it permanently sticking out the back would be annoying but because i run a tyre carrier, its never in the way.
I've got a D4 and have gone through this same exercise with getting the hitch right so the van sits level.
I bought an adjustable 4tonne adjustable for about 100 bucks and it works well. If I was going off road I wouldn't leave the thing on anyway so the fact the original equipment is a bit low doesn't bother me.
AlanH.
This is what is going on mine when I get it!
And I'll be bolting a pintle hook to it to tow my Number 5 trailer! It will give plenty of "wiggle room" to get the trailer level.
pintle.jpg
2012 L320 Range Rover Sport Fuji White
REMLR 012
No 5 Trailer ARN 177-295
2006 Disco 3, 4L V6 Petrol SE Deceased Feb 26 2023
SOLD Engineers Trailer - no id
SOLD RAAF 231194 Perentie 110 GS - SIR ANGUS
SOLD 4MP COY Series 3 FFR 30-209
Passing this on as popped up on a social media feed out of the blue. Thought it might be of interest to the towing people;
Best Height-adjustable Hitch | Rhino Hitch
Looks awesome, but the issue would be, in our nanny country(!), that it would have to be tested and rated to Australian ADR's (or whatever it is for tow hitches).
2012 L320 Range Rover Sport Fuji White
REMLR 012
No 5 Trailer ARN 177-295
2006 Disco 3, 4L V6 Petrol SE Deceased Feb 26 2023
SOLD Engineers Trailer - no id
SOLD RAAF 231194 Perentie 110 GS - SIR ANGUS
SOLD 4MP COY Series 3 FFR 30-209
I must be missing something here. I have a D4 16.5. When I hook up my off road caravan to the car, the car suddenly starts to raise the back up and so almost self level automatically. Opposite happens when I take van off the tow pin. Car suddenly drops. I have the standard hitch, so wonder why everybody else seems to have issues and needs a Mitch hitch. I understand the earlier models and the D3 with the plough but surely it must have been fixed by the time my car was made, because of what I have experienced.
2016.5 TDV6 Graphite D4,Corris Grey,APT sliders,Goe air comp plate,UHF & HF radio,Airflow snorkel,Discrete Winch,Compo rims with 265/65/18 Wildpeak AT3W, LLAMs,Traxide dual battery,EAS emergency kit,Mitch Hitch EGR blank & delete,ECU remap
It's about ground clearance.... what you are describing is perfectly normal behaviour for any air suspension D3 or D4.... and the standard hitch is fine height wise for the highway.
The reason everyone describes the hitch as a plough.... is that is exactly how it behaves off road... your departure angle is totally trashed and it doesn't take a big incline to dig it into the ground.
The standard hitch puts the receiver about 400 mm off the ground - A Mitch Hitch puts it closer to 600.
That's the main reason why people replace the standard hitch.
Mark
Of all the things I've lost, I miss my mind the most![]()
2015 TDV6 D4.... the latest project... Llams, Traxide, Icom 455, Tuffant Kimberleys and Mofos.... so far.
2012 SDV6 SE D4 with some stuff... gone...
2003 D2a TD5...gone...
2000 D2 V8...gone...
https://bymark.photography
Thanks Mark, I understand that but I dont bother taking the hitch off anymore, and as yet I have not noticed that it has developed any plough characteristics, even in 4WDing. Maybe I have not got the car on such an extreme angle as yet, or I have used my LLAMs to avoid the problem before it arises. Just had a quick look as i went 4wding on the weekend, and ther is no marks on it at all. I must be lucky!
2016.5 TDV6 Graphite D4,Corris Grey,APT sliders,Goe air comp plate,UHF & HF radio,Airflow snorkel,Discrete Winch,Compo rims with 265/65/18 Wildpeak AT3W, LLAMs,Traxide dual battery,EAS emergency kit,Mitch Hitch EGR blank & delete,ECU remap
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks