Results 1 to 6 of 6

Thread: Some suspension fault questions.

  1. #1
    Join Date
    Jan 2010
    Location
    Melbourne
    Posts
    71
    Total Downloaded
    0

    Some suspension fault questions.

    I just finished spending 2 days replacing the power steering bracken. (something I recommend nobody ever does)

    Now I have the car back together I have a problem with the suspension. The car is sitting low and the compressor is not coming on at all. Some suspension fault questions. First guess is I have broken something.

    The compressor was on its last legs and I was about to put a kit through it but now it is just not working at all.

    Questions are:

    Does the car stop the pump if it picks up fault somewhere?

    What could I have damaged around left front suspension to break it?

    If the pump just suddenly died , how can I test it?

    Could it just need a reset? (Wishfull thinking)

  2. #2
    Join Date
    Oct 2016
    Location
    Perth, AU
    Posts
    1,002
    Total Downloaded
    0
    Do you have a diagnostic tool? (or access to one?)
    2010 TDV6 3.0L Discovery 4 SE remapped to RRS output, Alaska White, GME XRS-330c, IIDTool BT, Dual Battery, Apple CarPlay, OEM Retrofitted: Cornering lights, Door card lights, Power + Heated Seats, Logic 7 audio

  3. #3
    Join Date
    Jan 2010
    Location
    Melbourne
    Posts
    71
    Total Downloaded
    0
    Quote Originally Posted by veebs View Post
    Do you have a diagnostic tool? (or access to one?)
    Unfortunately I don't have one and don't know anybody with one. Except the machanic which us looking very attractive at this point

  4. #4
    Join Date
    Jan 2010
    Location
    Melbourne
    Posts
    71
    Total Downloaded
    0
    Update

    Sorry, the pump is working. Just not getting any response from moving the suspension up or down.

  5. #5
    Join Date
    Oct 2016
    Location
    Perth, AU
    Posts
    1,002
    Total Downloaded
    0
    well, a hard reset couldn't hurt - take both leads off the battery, and connect together. Note, don't connect the battery terminals, just the leads.
    2010 TDV6 3.0L Discovery 4 SE remapped to RRS output, Alaska White, GME XRS-330c, IIDTool BT, Dual Battery, Apple CarPlay, OEM Retrofitted: Cornering lights, Door card lights, Power + Heated Seats, Logic 7 audio

  6. #6
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    Quote Originally Posted by veebs View Post
    well, a hard reset couldn't hurt - take both leads off the battery, and connect together. Note, don't connect the battery terminals, just the leads.
    Unless a 2nd battery c/w Traxide controller is fitted....
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!