Do you have a diagnostic tool? (or access to one?)
I just finished spending 2 days replacing the power steering bracken. (something I recommend nobody ever does)
Now I have the car back together I have a problem with the suspension. The car is sitting low and the compressor is not coming on at all.First guess is I have broken something.
The compressor was on its last legs and I was about to put a kit through it but now it is just not working at all.
Questions are:
Does the car stop the pump if it picks up fault somewhere?
What could I have damaged around left front suspension to break it?
If the pump just suddenly died , how can I test it?
Could it just need a reset? (Wishfull thinking)
Do you have a diagnostic tool? (or access to one?)
2010 TDV6 3.0L Discovery 4 SE remapped to RRS output, Alaska White, GME XRS-330c, IIDTool BT, Dual Battery, Apple CarPlay, OEM Retrofitted: Cornering lights, Door card lights, Power + Heated Seats, Logic 7 audio
Update
Sorry, the pump is working. Just not getting any response from moving the suspension up or down.
well, a hard reset couldn't hurt - take both leads off the battery, and connect together. Note, don't connect the battery terminals, just the leads.
2010 TDV6 3.0L Discovery 4 SE remapped to RRS output, Alaska White, GME XRS-330c, IIDTool BT, Dual Battery, Apple CarPlay, OEM Retrofitted: Cornering lights, Door card lights, Power + Heated Seats, Logic 7 audio
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks