Thread: D4 rear brakes

I've had my brakes done by a local independent garage without issues. Had pads and discs replaced, and the last time just pads. I have not asked them to clean the EPB brakes though - that was done by an LR specialist.

Ron

I recently had Roverworks Canberra do my MY16 D4 rear disks at 65k and the wear indicator on. Such a good price I had them do the fronts too. $440 for the lot.

I did the tears and referenced the Bodsy Brake Bible and found it a simple activity on a Disco.

Two weeks after a service last month my brake wear indicator come in the middle of nowhere and over 1000 k from anywhere. On return a good look said it was time for rotors as well. To my surprise when doing the rears myself the inner left pad was down to metal and had gone undetected at service because the Computer told the indie all was good with the brakes.

Lesson here is the wear indicator warning light while wear should be relatively even across the pads across a given axle but it will actually only tell you the state of ONE of the 4 pads and if there is a calliper issue your only way to tell is have look..... yourself. This particular pad was not one with the wear sensor. It would of happily ground down to nothing (as it did)
Oh and if the wear sensor triggers that needs to be replaced too.

Anyway relatively straight forward job with the right tools and following the above mentioned bodsy brake bible, no bleeding required and all good now. But.....computer said it was good???
BTW sorted the calliper too.

Originally Posted by Konradical

Thirdly, has anyone had any experience with Brembo branded brake components on these vehicles? I have found a Brembo alternative which is slightly cheaper, and considered using it in place of genuine.

Also open to alternatives.

Thanks.

Are the factory pads actually Brembo anyway if you have the front Brembo calipers? On my Audi the pads are marked as Audi and also Brembo. That said, the Brembo pads are excellent high friction pads but they do produce a bit of brake dust for your shiny wheels - I have to clean them each week.

I am thinking I will give them a go. Brembo is a solid brand with a pretty good reputation. Will just need to decipher Rimmer Bros code and model application.

When we got the car back, they left the repair sheet in the car as I have asked them to do for my records and I read that the rear brakes were "near" wear limits and that the wear sensor lead and height sensor lead were pinched. Presumably from when they had the rear apart last time. They replaced both under warranty.

I'm yet to find a dealer of any brand of car that doesn't tell me that my brakes need doing at the next service.

Originally Posted by kenl

I'm yet to find a dealer of any brand of car that doesn't tell me that my brakes need doing at the next service.

Yep. Service departments have targets like sales departments. Always brakes, rotors, and the good old "oh the inner of the rear tyres is worn and they both need replacing" is a good one too. If 50% of people agree then targets are easily met.

I'm just so lucky my RR L405 sold this week (brakes done for RWC!) and I could find a beautiful high km 2014 Disco I can live with, pay off some debt and found an awesome independent LR specialist a 20 min walk from home in this process.