Just measured the gap on my D3 S, bit variable for what I thought was factory fittedThe bottom of the strips is between 50 and 58mm up from the longitudinal panel crease along the lower part of the doors; and between 125 and 133 mm up from the top of the plastic trim along the bottom of the doors (below the panel crease).
Hope that helps,
Nathan


Reply With Quote
The bottom of the strips is between 50 and 58mm up from the longitudinal panel crease along the lower part of the doors; and between 125 and 133 mm up from the top of the plastic trim along the bottom of the doors (below the panel crease).

Bookmarks