So it's different from the infamous D4 'hesitation' coming out of intersections and onto roundabouts, etc?
I have had sudden engine power failures on six occasions. All forward thrust disappeared each time, including in some very compromising situations. Took me a few episides to realise I could overcome it each time by releasing the accelerator and then immediately pressing it again, and the engine would carry on as per normal.
Dealer is stumped (more likely that they didn’t actually believe me and didn’t look into it)😂 it hasn’t happened for a few months, but I’ve mostly been using my D5 recently to keep the k’s down on my beloved D4 (185k currently).
So it's different from the infamous D4 'hesitation' coming out of intersections and onto roundabouts, etc?
You'll need to plug in an OBDII code reader (Gap ID tool is the preferred) and check what error codes are present. This is what the dealer should/would have done. The vehicles ECUs log all faults and codes.
If they haven't or wont, take it to a reputable LR dealer or an independent mechanic who knows Land Rovers and has the right tools.
Eric
D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
Link to my D4 Build Thread
D3 2005 V8 Petrol
Ex '77 RRC 2 door. Long gone but not forgotten.
If the engine isn’t seeing a fault, eg a sensor is misreporting, and there is no other way for it to know that sensor is at fault, it won’t necessarily report a fault.
You are generally right though that most issues trigger faults as issues generally affect multiple systems.
2010 TDV6 3.0L Discovery 4 HSE
2007 Audi RS4 (B7)
Thanks for that, that clarifies it for me.
Ah yes, that lovely hesitation before she finally decides to accelerate. No it's not that. It's a very definite sudden loss of engine power, has happened whilst accelerating, and whilst cruising along at the same speed. Honestly I don't know why the Dealer never seems to have any idea. You guys on this forum should go work for Land Rover. At least problems would actually be solved, not "are you sure you aren't imagining it?"!!
Whilst they never did find the problem, it hasn't recurred for a while now. As I mostly use the D4 to tow, lets hope it never happens towing 3.5T up a hill.
This happened to me - and still does happen from time to time - especially when accelerating from stationary.
It turns out my hiking boot (and another pair of shoes) are just wide enough to brush the edge of the brake pedal if I'm not careful where I put my foot. It's enough to activate the brake switch and the car thinks you actually want to stop.
I kid you not! I also saw this issue posted on the D3&4 Owners FB group, and suggested the OP check his foot position. It turned out he had in fact just bought new boots and that was the cause.
Worth checking if it's that simple.
If at first you don't succeed, that's one data point. - xkcd
----------------------------------------------------------------------
2011 Discovery 4 SDV6 HSE
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks